Available 
| Digital inputs configurable | No |
| Digital outputs configurable | No |
| Type of voltage (input voltage) | DC |
| Type of output voltage | DC |
| Type of digital output | Relay |
| Type of electric connection | Screw connection |
| Status indicator | 4 yellow |
| Output delay time, max | OFF to ON: 10 ms, ON to OFF: 10 ms |
| Wiring category | 2 - on signal ports, 2 - on power ports |
| Number of I/O | 4-channel relay output |
| Relay contact, continuous | 2.0 A @ 120V AC maximum volts, 0.35 power factor |
| Relay contact, make | 7.5 A @ 240V AC maximum volts, 0.35 power factor |
| Relay contact, break | 28VA @ 24V DC maximum volts, 0.35 power factor |
| Pilot duty rating | C300, R150 |
| Insulation stripping length | 5 mm |
| Wire size | 0.05...1.31 mm2 (30...16 AWG) solid copper wire rated @ 90 ðC (194 ðF ) insulation maximum |
| Isolation voltage | 240V (continuous), reinforce insulation type, between output channels and output channels to backplane type tested for 60 s @ 1480V AC Outputs to Outputs, Outputs to Backplane |
| Redundancy | No |
| SIL according to IEC 61508 | None |
| Minimum load per point | 10 mA |
| Initial contact resistance of relay, max | 30 mOhm |
| Wire type | Copper |
| Backplane power | 3.3V DC, 38 mA |
| Inrush current | <120 mA @ 3.3V, <120 mA @ 24V |
| Output current, resistive | 2 A @ 5...30V DC, 0.5 A @ 48V DC, 0.22 A @ 125V DC, 2 A @ 125V AC, 2 A @ 240V AC |
| Output power, resistive, max | 250VA for 125V AC resistive loads, 480VA for 240V AC resistive loads, 60VA for 30V DC resistive loads, 24VA for 48V DC resistive loads, 27.5VA for 125V DC resistive loads |
| Output current, inductive | 1.0 A steady state @ 5...28V DC, 0.93 A steady state @ 30V DC, 0.5 A steady state @ 48V DC, 0.22 A steady state @ 125V DC, 2.0 A steady state, 15 A make @ 125V AC, PF - cos ø = 0.4, 2.0 A steady state, 7.5 A make @ 240V AC, PF - cos ø = 0.4 |
| Surrounding air temperature, max | 65 ðC |
| North American temperature code | T4 |
| Relative humidity | 5...95% noncondensing |
| Operating temperature | -20 to 65 ðC |
| Nonoperating temperature | 40 to 85 ðC |
| Enclosure type rating | None (open-style) |
| Terminal base screw torque, max | 0.19 Nm (1.7 lb-in.), using a 2.5 mm |
| Shock | Operating: 10 g |
| Vibration | 2.0 G @ 10â⬦500 Hz |
| Mounting torque | 0.2 Nm |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
Description other products
