2080-MOT-HSC ROCKWELL AUTOMATION

Time delay at signal exchange	2 ms
Suitable for safety functions	Yes
Digital inputs configurable	Yes
Digital outputs configurable	Yes
Type of voltage (input voltage)	DC
Type of output voltage	DC
Type of digital output	Other
Type of electric connection	Screw connection
Wiring category	2 - on signal ports
Wire size	Solid: 0.14 mm2 (26 AWG)...1.5 mm2 (16 AWG) @ Rated @ 90 Ã°C (194 Ã°F) insulation maximum, Stranded: 0.14 mm2 (26 AWG)...1.0 mm2 (18 AWG) @ Rated @ 90 Ã°C (194 Ã°F) insulation maximum
Isolation voltage	Input module: 50V (continuous), Basic Insulation Type, Inputs/Outputs to Backplane. Type tested for 60s @ 720V DC, Inputs/Outputs to Backplane
Redundancy	No
Short-circuit protection, outputs available	No
Bus current draw	60 mA @ 3.3V DC
Width	31.5 mm
Height	62 mm
Depth	20 mm
Shock	IEC 60068-2-27 (Test Ea, unpackaged shock): 25 g, nonoperating, 35 g (Panel Mount) nonoperating
Vibration	IEC 60068-2-6 (Test Fc, operating), 2 G @ 10...500 Hz
Terminal screw torque	0.22...0.25 Nm (1.95...2.21 lb-in) (using a 2.5 mm (0.10 in.) flat-blade screwdriver)
Surrounding air temperature, max	65 Ã°C
North American temperature code	T4
Emissions	CISPR 11 (IEC 61000-6-4): Class A
ESD immunity	IEC 61000-4-2: 6 kV contact discharges, 8 kV air discharges
Relative humidity	IEC 60068-2-30 (Test Db, unpackaged damp heat), 5...95% noncondensing
Conducted RF immunity	IEC 61000-4-6, 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
EFT/B immunity	IEC 61000-4-4: Ã±2 kV @ 5 kHz on signal ports
Operating temperature	-20...65 Ã°C (-4...149 Ã°F): IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, operating dry heat), IEC 60068-2-14 (Test Nb, operating thermal shock)
Surge transient immunity	IEC 61000-4-5: Ã±2 kV line-earth(CM) on shielded ports
Nonoperating temperature	-40...85 Ã°C (-40...185 Ã°F), IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
Radiated RF immunity	IEC 61000-4-3: 10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz,
On-state voltage drop, max	0.5V DC
Reverse polarity protection	None
Output on-state current	0.5 A
Number of outputs	16 (1 physical output, 15 virtual)
Enclosure type rating	Meets IP20
Output voltage range	5...30V DC
Off-state voltage, max	1.0V DC
On-state current, min	2 mA
Number of inputs	1 Quadrature (ABZ) differential input
Pulse width, min	2 Ã¼s
Input impedance, nom	3580 Ohm
Input frequency, max	250 kHz (50% duty)
Maximum count	48 Bit
Phase separation, min	500 ns
Input current range	2 mA
Input voltage range	0...30V DC
Off-state leakage current	0.5 mA
ON-state voltage range	2.6...30V DC