Not available 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/61847ea072ac2f4a94bf2299909bd975/-S204x204-FJPG Width: 12.2 mm Height: 119.8 mm Depth: 71.5 mm |
| Interfaces | Inline local bus Connection method: Inline data jumper Transmission speed: 500 kbps Transmission physics: Copper |
| System properties | Module ID code (dec.): 190 ID code (hex): BE Length code (hex): 41 Length code (dec): 65 Process data channel: 4 bit Input address area: 4 bit Output address area: 0 Byte Register length: 4 bit Required parameter data: 1 Byte Required configuration data: 4 Byte |
| Input data | Analog Input name: Resistance sensor Description of the input: Input for PTC thermistor Number of inputs: 1 Connection method: Spring-cage connection Connection technology: 2-conductor Sensor types (RTD) that can be used: PTC thermistor according to DIN 44081 or DIN 44082 Input filter time: typ. 10 ms Nominal value of the current sources: max. 1.2 mA (For non-load voltage of < 8 V DC) Linear resistance measuring range: 2.7 ké ... 3.5 ké (Shutdown range, total resistance) 50 é ... 2.25 ké (Operating range, total resistance) |
| Output data | Analog Connection method: Spring-cage connection Connection technology: 2-conductor Number of outputs: 1 Protective circuit: short-circuit and overload proof Current output signal: 500 mA (per output) Voltage output signal: 24 VÃDC (US - 1 V) Load/output load voltage output: < 2.7 ké (Total resistance for output signal HIGH) |
| Product properties | Type: modular Product type: I/O component Product family: Inline |
| Electrical properties | Potentials Power consumption: max. 12 W (For R = 12 é, L = 1.2 H/48 é) Potentials: Communications power (U Supply voltage: 7.5 VÃDC (via voltage jumper) Current draw: max. 60 mA Potentials: Segment circuit supply (U Supply voltage: 24 VÃDC (via voltage jumper) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 500 mA Electrical isolation/isolation of the voltage ranges Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics): 500 VÃAC, 50 Hz, 1 min. Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics): 500 VÃAC, 50 Hz, 1 min. Test voltage: 7.5 V supply (bus logics)/24 V analog supply (analog I/O): 500 VÃAC, 50 Hz, 1 min. Test voltage: 24ÃV analog supply (analog I/O)/functional ground: 500 VÃAC, 50 Hz, 1 min. Test voltage: Thermistor / all other areas: 1200 VÃAC, 50 Hz, 1 min. |
| Connection data | Connection technology Connection name: Inline connector Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.08 mm² ... 1.5 mm² Conductor cross section flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.08 mm² ... 1.5 mm² Conductor cross section, flexible: 0.08 mm² ... 1.5 mm² Conductor cross section AWG: 28 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 80 kPa ... 106 kPa (up to 2000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): -25 % ... 55 % (75% average, 85% seldom) Permissible humidity (storage/transport): -25 % ... 85 % |
| Standards and regulations | Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1) |
| Mounting | Mounting type: DIN rail mounting |
Description other products
