1216924 PHOENIX CONTACT - Technology Bsa

FL SWITCH EP7428R-L3F1-C1 - Industrial Ethernet Switch

Ethernet gigabit modular switch with slots for twenty-four 10/100/1000 Mbps copper or 100/1000 Mbps SFP ports and four 1000/10,000 Mbps SFP ports using hot-swappable rear modules. Conformal coating for harsh environments.

Product Code: 1216924 Copia - Copy

Partner cod.: 1216924 Copia - Copy

PHOENIX CONTACT

Dimensions	Width: 486.2 mm Height: 44.4 mm Depth: 446.7 mm
Notes	Note on application Note on application: Only for industrial use
Mounting	Mounting type: Rack mount, includes brackets
Interfaces	Ethernet Connection method: RJ45 Note on the connection method: Auto negotiation and autocrossing Transmission speed: 10/100/1000 Mbps Transmission physics: Copper Transmission length: 100 m (per segment) No. of channels: RJ45 or SFP Ethernet (SFP) Connection method: SFP Transmission speed: 1000/10000 Mbps (full duplex) Transmission physics: Depending on the SFP module
Output data	Digital: Output name: Alarm relay output: 24 V DC, 1 A maximum
Product properties	Product type: Switch Product family: Managed Switch EP7000 Data management status Article revision: 05 Insulation characteristics Overvoltage category: II Degree of pollution: 2 Switch functions Signal contact control voltage: 24 V DC Signal contact control current: 1 A MAC address table: 16k
Electrical properties	Maximum power dissipation for nominal condition: 60 W Supply Supply voltage: Based on modular power supplies used Function Signal contact control voltage: 24 V DC Signal contact control current: 1 A
Connection data	Connection technology Connection name: Power supply Power supply Connection method: Screw connection Conductor cross section, rigid: 0.2 mm² ... 2.5 mm² Conductor cross section, flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40 °C ... 85 °C (Type tested to 85 °C for 16 hours) Ambient temperature (storage/transport): -40 °C ... 85 °C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing) Vibration (operation): in acc. with IEC 60068-2-6: 5g, 150 Hz
Standards and regulations	Standard designation: Ambient conditions Standards/specifications: IEC 61850-3 Ed. 2 IEEE 1613
Approvals	Conformity/Approvals Conformance: CE-compliant
EMC data	Noise immunity: IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005