Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION - Product Catalogue

View our Product Catalogue

ROCKWELL AUTOMATION 440F-M2030HYNN
ROCKWELL AUTOMATIONNot available
Safety Mat - Yellow, 1000mm (3.28 ft.) x 1500mm ( 4.92 ft.), One 9.1m (30 ft.) 5-wire cbl. w/ M12 male connector, exit upper left for use w/ArmorBlock Guard I/O, No Trim, No Controller
Product Code:440F-M2030HYNNCopia - Copy
Partner Cod.: 440F-M2030HYNNCopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 847H-DN1A-RG02000
ROCKWELL AUTOMATIONNot available
Incremental Encoder, Standard Square Flange, 3/8 inch Diameter Shaft with Flat, 4.5-5.5 Volt Line Driver,TTL (B-Leads-A, CW, Z gated with BN), MS Connector, 10-Pin with mating connector, 2000 Pulses per Revolution.
Product Code:847H-DN1A-RG02000Copia - Copy
Partner Cod.: 847H-DN1A-RG02000Copia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 100S-C43L14C
ROCKWELL AUTOMATIONNot available
100S-C Safety Contactor, 43A, Line Side, 200-220V 50Hz / 208-240V 60Hz, 3 N.O., 1 N.O. 4 N.C.
Product Code:100S-C43L14CCopia - Copy
Partner Cod.: 100S-C43L14CCopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 800HC-BR6A
ROCKWELL AUTOMATIONNot available
30.5mm Type 4/4X/13 Mom. Contact PB, Non-Illum., Red, Extended Hd, 1 NO-1 NC, Finger Safe Guards
Product Code:800HC-BR6ACopia - Copy
Partner Cod.: 800HC-BR6ACopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 140G-H6F3-D12-SJ-KJ
ROCKWELL AUTOMATIONNot available
140G - Molded Case Circuit Breaker, H frame, 65 kA, T/M - Thermal Magnetic, 3 Poles, Rated Current 125 A, Shunt Trip 24...30V AC/DC, 1 NO/NC AUX, 24V
Product Code:140G-H6F3-D12-SJ-KJCopia - Copy
Partner Cod.: 140G-H6F3-D12-SJ-KJCopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 800F-35BE100S
ROCKWELL AUTOMATIONNot available
800F-35Be100S
Product Code:800F-35BE100SCopia - Copy
Partner Cod.: 800F-35BE100SCopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 871TS-M8BN18-D4
ROCKWELL AUTOMATIONNot available
Proximity Sensor, 18mm Diameter, Threaded Stainless Steel 316L Barrel, 8mm Sensing Distance, Shielded, N.O. and N. C., Sink (NPN), Micro QD (DC)
Product Code:871TS-M8BN18-D4Copia - Copy
Partner Cod.: 871TS-M8BN18-D4Copia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 440T-MRKSE11II
ROCKWELL AUTOMATIONNot available
Single Key Rotary Switch - Enclosure Mounted, Standard Key Code Labeling, 2 N.O. & 2 N.C. Contacts, 20 Amp Current
Product Code:440T-MRKSE11IICopia - Copy
Partner Cod.: 440T-MRKSE11IICopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 20G11TD545JN0NNNNN
ROCKWELL AUTOMATIONNot available
PowerFlex 755 AC Drive, with Embedded Ethernet/IP, Air Cooled, AC Input with DC Terminals, Open Type/Frame 8 - 10, 545 Amps, 500HP LD, 450HP ND, 350HP HD, 480 VAC, 3 PH, Frame 8, Filtered, CM Jumper Installed, None, Blank (No HIM)
Product Code:20G11TD545JN0NNNNNCopia - Copy
Partner Cod.: 20G11TD545JN0NNNNNCopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 871TM-D5ED18-S2
ROCKWELL AUTOMATIONNot available
Proximity Sensor, DeviceNet, 18mm Diameter, Shielded, Tubular:Stainless Steel, Metal Face, 5mm Sensing Distance, N.O., N.C. Programmable, CPE Cable (5 Cond)
Product Code:871TM-D5ED18-S2Copia - Copy
Partner Cod.: 871TM-D5ED18-S2Copia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATIONNot available
25B-D2P3N304
Product Code:25B-D2P3N304Copia - Copy
Partner Cod.: 25B-D2P3N304Copia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 871TM-D5ED18-D5
ROCKWELL AUTOMATIONNot available
Proximity Sensor, DeviceNet, 18mm Diameter, Shielded, Tubular:Stainless Steel, Metal Face, 5mm Sensing Distance, N.O., N.C. Programmable, Micro QD (DC)
Product Code:871TM-D5ED18-D5Copia - Copy
Partner Cod.: 871TM-D5ED18-D5Copia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATIONNot available
Access Interlock - Dual Key, Standard Key Code Labeling, Chain Actuator. Primary key trapped, Secondary key free to release chain.
Product Code:440T-MDCLE10BADACopia - Copy
Partner Cod.: 440T-MDCLE10BADACopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATIONNot available
Access Interlock - Dual Key, Standard Key Code Labeling, Chain Actuator. Primary key trapped, Secondary key free to release chain.
Product Code:440T-MDCLE10BAEACopia - Copy
Partner Cod.: 440T-MDCLE10BAEACopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 20G11TD430AN0NNNNN
ROCKWELL AUTOMATIONNot available
PowerFlex 755 AC Drive, with Embedded Ethernet/IP, Air Cooled, AC Input with DC Terminals, Open Type/Frame 8 - 10, 430 Amps, 400HP LD, 350HP ND, 300HP HD, 480 VAC, 3 PH, Frame 8, Filtered, CM Jumper Removed, None, Blank (No HIM)
Product Code:20G11TD430AN0NNNNNCopia - Copy
Partner Cod.: 20G11TD430AN0NNNNNCopia - Copy
ROCKWELL AUTOMATION
ROCKWELL AUTOMATION 20G11TD545AN0NNNNN
ROCKWELL AUTOMATIONNot available
PowerFlex 755 AC Drive, with Embedded Ethernet/IP, Air Cooled, AC Input with DC Terminals, Open Type/Frame 8 - 10, 545 Amps, 500HP LD, 450HP ND, 350HP HD, 480 VAC, 3 PH, Frame 8, Filtered, CM Jumper Removed, None, Blank (No HIM)
Product Code:20G11TD545AN0NNNNNCopia - Copy
Partner Cod.: 20G11TD545AN0NNNNNCopia - Copy
ROCKWELL AUTOMATION

Rockwell Automation is a world leader in providing solutions for industrial automation and information management suitable for a wide range of sectors.

This company brings together several brands, including "Allen-Bradley", for continuous and discrete control systems, ignition and protection of the engine, industrial safety, motion control and services, and "Rockwell Software", for software solution in production management.

It also deals with Powerflex frequency converters , drive systems, programmed controllers (Rockwell Automation PLCs) and all advanced process control, motor and I/O monitoring systems identified by wide range of Logix products (Plc Logix, ControlLogix, MicroLogix, CompactLogix, SoftLogix, etc.).

Technology BSA is a market maker and authorized distributor of Rockwell Automation for the Piedmont, Ligura, Valle d'Aosta, Lombardy and Veneto regions.

PRODUCT CATEGORIES

  • - Advanced Process Control
  • - Condition monitoring and I/O
  • - Design and Operations Software
  • - Distributed Control Systems
  • - Drives
  • - Drive System
  • - Human Machine Interface
  • - Industrial Control Products
  • - Industrial Network Products
  • - Industrial Sensors
  • - Manufacturing Execution System
  • - Motion Control
  • - Motor Control Centers
  • - Programmable Controllers
  • - Safety Components
  • - Safety Instrumented Systems