Product Catalogue - Technology Bsa

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with replaceable mating face frame, with replaceable DC power contacts, with right-hand angled panel feed-through, with variable-speed fan, with digital temperature sensors, HPC CCS type2, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 5 m, black, straight

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with replaceable mating face frame, with replaceable DC power contacts, without panel feed-through, with digital temperature sensors, HPC CCS type2, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 5.5 m, black, straight

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with replaceable mating face frame, with replaceable DC power contacts, without panel feed-through, with digital temperature sensors, HPC CCS type2, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 6 m, black, straight

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with replaceable mating face frame, with replaceable DC power contacts, with right-hand angled panel feed-through, with variable-speed fan, Single-core wires for four-conductor measurement are not connected and are non-functional, CCS type 2, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIX CONTACT logo, cable: 3 m, black, straight

CHARX connect, Cooling unit, Accessories, with variable-speed fan, with variable-speed pump, for cooling the cooling liquid of a Phoenix Contact HPC DC charging cable, HPC CCS type2, HPC CCS type1, length: 1.5 m

Programmable charging controller for DC and AC charging of electric vehicles in accordance with IEC 61851-1,-23, DIN SPEC 70121, and CHAdeMO, with integrated cellular modem

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), 32 A / 480 V (AC), Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers, in housing

CHARX control modular, the residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents.

CHARX control modular, AC charging controller, IEC 61851-1, operating mode:Stand-Alone, Client, interface:CHARXcontrolmodular system bus, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO15118, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), Cellular communication(4G/2G), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), Cellular communication(4G/2G), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO15118, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, three-phase energy meter for active power measurement with direct measurement in networks of up to 400V/40A, with RS-485 interface, certified in accordance with the MID directive

CHARX control modular, Cable set, 4-pos., with plug-in contact at one end, For connecting the EV-RCM-6DC-WAT residual current monitor, item no.: 1309697 and CHARX RFID/NFC-PCB, item no.: 1391227 to the modules of the CHARX control modular charging controller family, length: 1 m

CHARX control modular, Cable set, 3-pos., with plug-in contact at one end, Exclusively for connecting the CHARX 4,3 LCD display, item no.: 1426836, to the modules of the CHARX control modular charging controller family, length: 1 m

CHARX control modular, the residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents.

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers