Catalogo Prodotti - Technology Bsa

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers, in housing

CHARX control modular, the residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents.

CHARX control modular, AC charging controller, IEC 61851-1, operating mode:Stand-Alone, Client, interface:CHARXcontrolmodular system bus, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO15118, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), Cellular communication(4G/2G), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), Cellular communication(4G/2G), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO15118, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, three-phase energy meter for active power measurement with direct measurement in networks of up to 400V/40A, with RS-485 interface, certified in accordance with the MID directive

CHARX control modular, Cable set, 4-pos., with plug-in contact at one end, For connecting the EV-RCM-6DC-WAT residual current monitor, item no.: 1309697 and CHARX RFID/NFC-PCB, item no.: 1391227 to the modules of the CHARX control modular charging controller family, length: 1 m

CHARX control modular, Cable set, 3-pos., with plug-in contact at one end, Exclusively for connecting the CHARX 4,3 LCD display, item no.: 1426836, to the modules of the CHARX control modular charging controller family, length: 1 m

CHARX control modular, the residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents.

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers

CHARX control modular, Cable set, 4-pos., with plug-in contact at one end, Exclusively for connecting the EV-RCM-6DC-WAT residual current sensor, Item no.: 1309697 to modules in the CHARX control modular charging controller family, length: 0.4 m

CHARX connect universal, Protective cover, Accessories, for vehicle charging inlet, CCS type1, Plug-on assembly, housing: black

CHARX connect universal, Protective cover, Accessories, for vehicle charging inlet, CCS type2, Plug-on assembly, housing: black

CHARX connect universal, Locking, Accessories, for mounting on vehicle charging inlets, Type2, IEC 61851-1, Single wires, length: 1 m, locking actuator: 24 V, 4-pos.

CHARX control modular, LCD color display, 4.3", including preinstalled charging software for electric vehicles, micro USB port, adhesive mounting (mounting material not supplied as standard), up to 12 charging points, can only be used in calibration law mode

Program and configuration memory for storing the application program and other files in the file system of the PLC, plug-in, 2 GB with license key for the function block libraries for E-Mobility

CHARX connect universal, Vehicle charging inlet, for charging electric vehicles with alternating current (AC), ACtype1, IEC 62196-2, SAEJ1772, 48 A / 250 V (AC), Single wires, length: 5 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the AC contacts.

CHARX connect universal, Vehicle charging inlet, for charging electric vehicles with alternating current (AC), ACtype1, IEC 62196-2, SAEJ1772, 80 A / 250 V (AC), Single wires, length: 5 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the AC contacts.