Product Catalogue - Technology Bsa

Lifeline Tensioner Spring

Contactor,37 A,110V 50 Hz / 120V 60 Hz.,AC,3 Normally Open Poles,No Contact Configuration,Single Pack,Line Side Coil Termination,Screw Terminals,Motor Load

Plug connectors and cables: Sensor/actuator cable

Photoelectric sensors: GR18

Spring Clamp Terminal Block,Two-Circuit Block with 1 Feed-Through and 1 Ground Circuit,4 mm (# 22 AWG - # 10 AWG) or 2.5 mm (# 22 AWG - # 12 AWG),Standard Feedthrough,Gray (Standard),

Red Lens Cap - Square

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Socket, number of potentials: 2, number of rows: 1, number of positions: 2, number of connections: 2, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0°, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

Plug-in miniature relay, with power contact, 2 changeover contacts, test button, mechanical switching position indicator, status LED, input voltage 24 V AC

871C, 2-Wire NAMUR, Tubular:Nickel Plated Brass, Short, 4mm Sensing Distance, NAMUR Output, Micro QD (DC)

Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, and power contact relay with test button, integrated status LED, and freewheeling diode. Contact switching type: 1 changeover contact. Input voltage: 24 V DC

140M-C-Afc

140MP Motor Protection Circuit Breaker / Manual Motor Starter, Frame Size A, 5 kA, Adjustable Thermal/Fixed Magnetic MPCB, 0.40 - 0.63A

Cable, Plug straight M12 SPEEDCON, coding: A, on Valve connector C (8 mm), with 1 LED, Wiring: Z diode

Inductive proximity sensors: IME

Plug-in miniature relay, with power contact, 2 changeover contacts, test button, mechanical switching position indicator, status LED, coil voltage 120 V AC

Inductive proximity sensors: IME

Feed-through connector, nominal cross section: 16 mm², color: green, nominal current: 76 A, rated voltage (III/2): 1000 V, contact surface: Silver, contact connection type: Pin, number of potentials: 6, number of rows: 1, number of positions: 6, number of connections: 6, product range: DFK-PC 16/..-STF, pitch: 10.16 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0°, plug-in system: COMBICON PC 16, Pin connector pattern alignment: Standard, locking: without, mounting: without, type of packaging: packed in cardboard

Photoelectric sensors: GR18

Multi-channel electronic circuit breaker for protecting four loads at 24VDC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.