Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 837RTD-N1G14A65P1-D4
ROCKWELL AUTOMATIONNot available

Resistance Thermometer Sensor, Standard, Non-Display, -22…+266 F (-30…+130 C), G 1/4 BSPP Male, 65 mm, Pt1000, 4 Pin DC Micro (M12)

837RTD Resistance Thermometer, Standard, Non-Display, -22 ..+266 F / -30 .. +130 C (without neck tube), G 1/4 BSPP Male, 65 mm, Pt1000 [Ohm], 4-Pin DC Micro(M12) Integral QD
Product Code: 837RTD-N1G14A65P1-D4
Partner cod.: 837RTD-N1G14A65P1-D4
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Ambient temperature-40 °C
Temperature measuring range-30 °C
Storage temperature-40 °C
Temperature probe length65 mm
ShockUp to 500 G (11.637 oz) depending on installation situation, medium, and temperature.
Ingress ratingIP67
VibrationThe acceleration values of 3 G (0.1 oz) required per DIN EN 60 751 (IEC 751) can be exceeded by far. Depending upon the installation situation, medium, temperature, and insertion length, the vibration resistance can be up to 10 G (0.35 oz)
Diameter measuring insert6 mm
Process connectionG 1/4 BSPP male
Display typeNon-display
Sensor modelStandard
Electrical connectionCircular connector M12 x 1, four pins, code A
Connection type4-pin DC micro (M12) integral QD
ThermowellStainless Steel 1.4305
Temperature rangeStandard: -30...+130 °C (-22...+266 °F)
Operating pressureMaximum 200 bar depending on medium, temperature, and thermal design
Output typePt1000
Response timeThe response time affects the following: Thermowell that is used, in this case the Stainless Steel 1.4305 ms, Heat transmission from thermowell to the measuring element, Flow rate of the medium