Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 800H-HP17KB6DXXX
ROCKWELL AUTOMATION 800H-HP17KB6DXXX
ROCKWELL AUTOMATION 800H-HP17KB6DXXX
ROCKWELL AUTOMATIONNot available

800H PB, Type 7&9 Selector Switch, 2 Position Selector Switch, Standard, Knob Lever Maintained, KB6 Cam, 1-NO Standard Contact, No Block This Position, No Block This Position, No Block This Position, No Guards - on Terminals

Hazardous Location Type 7&9 2 Pos. Sel. Switch-Non-Illum., Standard Barrel Length, White (Knob) / Gray (Metal Wing), Knob Lever Maintained, 1 NO
Product Code: 800H-HP17KB6DXXX
Partner cod.: 800H-HP17KB6DXXX
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Number of switch positions2
Spring-returnNo
With light sourceNo
Switching function latchingYes
Hole diameter30.5 mm
Type of electric connectionScrew connection
Mechanical life operations200000 minimum
Shock1/2 cycle sine wave for 11 ms ≥25 G (contact fragility) and no damage at 100 G
Vibration10...2000 Hz, 1.52 mm displacement (peak-to-peak) maximum/10 G maximum (except Logic Reed)
Terminal screw torque6 lb.in
Typical operating force for spring return selector switches5 inch-lb to stop, 0.2 inch-lb to return
Typical operating forces operator without contact blocksMaintained selector switch: 4 inch-lb maximum
Degree of protectionType 7 & 9 explosion proof (Type 3 and Type 4 ratings available with accessories)
Suitable for illuminationNo
Operational voltage (Ue), max600V AC, 600V DC
Thermal continuous current (Ith), max10 A AC, 2.5 A DC
Rated operational current69VA @ 28...600V DC
Rated operational current, break720VA @ 72...120V AC
Rated operational current, make7200VA @ 120...600V AC
Contact operationSlow, double make and break
Utilization categoryAC-15 per IEC, DC-13 per IEC
Position 2 contact blockNo block this position
Position 1 contact block1 NO, standard contact block (800T-XD1)
Position 3 contact blockNo block this position
Position 4 contact blockNo block this position
Wire gauge18 AWG
Dielectric strength2200V for 1 minute, 1300V for 1 minute (Logic Reed)
Electrical life cycle1000000 cycles at maximum rated load, 200000 cycles at maximum rated load (Logic Reed)
Material front ringPlastic
Type of control elementKey
2-position cam optionsKB6 cam
3-position cam optionsNot applicable
4-position cam optionsNot applicable
Position 5 contact blockNot applicable
Finger-safe guardsNo guards on terminals
Operator type & functionKnob lever, maintained
Insert lever colorWhite insert with standard or knob lever or grey color with metal winglever
With front ringYes
Operating temperature-20 °C
Humidity50% at 104 °F (40 °C)
Storage temperature-40 °C