Industrial Automation
194E Load switch







| Number of auxiliary contacts as normally open contact | 1 | 
| Number of auxiliary contacts as normally closed contact | 1 | 
| Number of poles | 3 | 
| Conditioned rated short-circuit current Iq | 15 kA | 
| Rated permanent current Iu | 63 A | 
| Rated operation power at AC-23, 400 V | 30 kW | 
| Max. rated operation voltage Ue AC | 600 V | 
| Rated operation power at AC-3, 400 V | 18.5 kW | 
| Rated short-time withstand current lcw | 1300 kA | 
| Type of control element | Door coupling rotary drive | 
| Rated frequency | 60 Hz | 
| Switch size | 63 A | 
| Lost power per pole | 2.4 W | 
| Conventional free air thermal current (Ith) | 75 A per IEC | 
| Conventional enclosed thermal current (Ie) | 63 A per IEC | 
| Rated operational voltage (Ue) | 690V per IEC | 
| Rated isolation voltage (Ui) | 690V per IEC | 
| Continuous current | UL/CSA (applications): 63 A | 
| Rated breaking capacity | AC-23A (cosÃâ0.45): 504 A @ 400V | 
| Motor FLA rating | UL/CSA application: 42 A @ 240V, 60 Hz, 3 pole, 3 phase | 
| Hp motor rating | UL/CSA application: 7 .5 Hp @ 120V, 60 Hz, 3 pole, 3 phase | 
| Fuse rating of circuit (type g, G), max | Short circuit current (co-ordination type 2): 63 A @ 400/415V | 
| Rated current (Ie) | DC-21A (for resistive loads): 63 A @ 96V, 2 pole in series, T ââ°¤1 ms, Ue max = 660V | 
| Rated power (Pe) | AC-3: 18.5 kW @ 690V | 
| Number of switches | 1 | 
| Motor drive integrated | No | 
| Motor drive optional | No | 
| Voltage release optional | No | 
| Type of electrical connection of main circuit | Screw connection | 
| Switching rate | 120 ops/h | 
| Rated impulse voltage (Uimp) | 8 kV per UL, CSA | 
| Test voltage (Ui) | 2.5 kV for 1 minute | 
| Interlockable | No | 
| Version as emergency stop installation | Yes | 
| Degree of protection (NEMA) | 4 | 
| Degree of protection (IP) | IP66 | 
| Material housing | Steel | 
| Tightening torque | 2.8 Nm (24.5 lb-in) | 
| Enclosure size | Standard size enclosure | 
| Rigid wire gauge | 2.5...25 mm2 (12...4 AWG) | 
| Fine strands wire gauge | 2.5...16 mm2 (12...4 AWG) | 
| Wire gauge, max | Terminal size per IEC 947-1: A7 | 
| Left side mounting | Earthing terminal (ground) | 
| Right side mounting | Auxiliary contact (1 NO, 1 NC) | 
| Protection class according to IEC 529 | Switch bodies: IP20 @ motor rating 60 Hz | 
| Version as safety switch | No | 
| Version as reversing switch | No | 
| Version as main switch | Yes | 
| Version as maintenance-/service switch | Yes | 
| With transparent cover | No | 
| Mechanical life operations | 200000 | 
| Model | Surface mounting | 
| Suitable for front mounting 4-hole | No | 
| Suitable for front mounting centre | No | 
| Colour control element | Red | 
| Device construction | Complete device in housing | 
| Actuator colour | Red/yellow | 
| Enclosed switch height, approx | Oversized enclosure: 167.38 mm (6.59 inch) @ 63 A | 
| Enclosed switch depth, approx | Oversized enclosure: 210.57 mm (8.29 inch) @ 63 A | 
| Enclosed switch width, approx | Oversized enclosure: 241.3 mm (9.50 inch) @ 63 A | 
| Installation | NEMA 3/4/12-IP66 painted steel-base/DIN rail, 6 x 4 x 5 | 
| Suitable for floor mounting | No | 
| Suitable for distribution board installation | No | 
| Suitable for intermediate mounting | No | 
| Ambient enclosed temperature | -20 ðC | 
| Ambient storage temperature | -40 ðC | 
| Ambient operation temperature | -25 ðC | 
Description other products
