Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PROSOFT TECHNOLOGY MVI56E-61850S
PROSOFT TECHNOLOGYNot available

IEC 61850 Server Communication Module for ControlLogix

Product Code: MVI56E-61850S
Partner cod.: MVI56E-61850S
PROSOFT TECHNOLOGY


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Tecnichal data
Features and Benefits
The ControlLogix® PAC is able to emulate multiple Intelligent Electronic Devices on an IEC 61850 network.
Add-On Instruction provides logical definitions for I/O, module status and control data easing configuration and maintenance of the module.
ProSoft Discovery Service (PDS) software is used to initially set the module’s IP address, so you don’t have to change your PC to the default subnet of the module.
Module functions as an IEC 61850 Server, allowing it to interface with SCADA systems.
Technical Specs
Specifications
Mounting Method:Chassis
Protocol:IEC 61850
Platform:ControlLogix
Client connections:Supports up to 8 independent client connections
Supported 61850 data point types:Status with Quality – 200 points
Supported 61850 data point types:SOE Status – 200 points
Supported 61850 data point types:Control Points – 200 points
Supported 61850 data point types:(FLOATDB type is 50 points maximum)
Supported 61850 data point types:Buffered Reports – 8 instances maximum
Supported 61850 data point types:Unbuffered Reports – 8 instances maximum
Supported functions:IEC 61850 Server functionality with support for the MMS Read and MMS Write functions using the GGIO logical node
Supported data types:GGIO logical node with support for the following data types:
Supported data types:BOOL
Supported data types:BYTE
Supported data types:INT
Supported data types:DINT (32-bit)
Supported data types:REAL (32-bit Float)
Supported data types:FLOATDB (32-bit Float)
Description
The MVI56E-61850S Ethernet Communication Module allows RockwellAutomation® ControlLogix® PACs to emulate Intelligent ElectronicDevices on an IEC 61850 Ethernet network to SCADA systems. Nowyour non-smart electrical substation devices, such as transformers andswitchgear, can present their data as IEC 61850 IEDs to the SCADAsystem. The module comes with an Add-On Instruction to be used with RSLogix™5000/Studio 5000™ for easier configuration and setup. Remotediagnostics of the unit can be viewed through controller tags in yourControlLogix® processor, reducing downtime.