Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 3050206
PHOENIX CONTACT 3050206
PHOENIX CONTACTNot available

QTTCB 1,5/ 2P BU - Double-level terminal block

Double-level terminal block, Current and voltage are determined by the plug used., nom. voltage: 500 V, nominal current: 17.5 A, connection method: Fast/plug-in connection, Rated cross section: 1.5 mm2, cross section: 0.25 mm2 - 1.5 mm2, mounting: NS 35/7,5, NS35/15, color: blue
Product Code: 3050206
Partner cod.: 3050206
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Download
Tecnichal data
NotesGeneral: Current and voltage are determined by the plug used.
Generalâۉ€¹
Note: In plugged-in condition, the most unfavorable paths of the entire plug-in connection are decisive.
When reconnecting the conductor, you must make sure that the section of the conductor already used for contacting is cut off again.
Product propertiesProduct type: Plug-in terminal block
Number of connections: 4
Number of rows: 2
Potentials: 2
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 6 kV
Maximum power dissipation for nominal condition: 0.56 W
Connection dataNumber of connections per level: 2
Nominal cross section: 1.5 mm²
Material wire insulation: PVC / PE
Internal cylindrical gage: A3
Connection in acc. with standard: IEC 61984
Conductor cross section rigid: 0.25 mm² ... 1.5 mm²
Cross section AWG: 24 ... 16 (converted acc. to IEC)
Conductor cross section flexible: 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible [AWG]: 24 ... 16 (converted acc. to IEC)
Flexible conductor cross section (ferrule with plastic sleeve): 0.25 mm² ... 1.5 mm²
Cross section, sensor conductors: 0.25 mm² ... 0.34 mm²
Nominal current: 17.5 A
Maximum load current: 17.5 A (with 1.5 mm² conductor cross section)
Nominal voltage: 500 V
DimensionsWidth: 5.2 mm
End cover width: 2.2 mm
Height: 87.8 mm
Depth on NSÂ35/7,5: 49.9 mm
Depth on NSÂ35/15: 57.4 mm
Material specificationsColor: blue
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60°C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130°C
Relative insulation material temperature index (Elec., UL 746 B): 125°C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Cable/lineWire diameter incl. insulation: 3 mm
Electrical testsSurge voltage test
Result: Test passed
Short-time withstand current 1.5 mm²: 0.18 kA
Power-frequency withstand voltage
Test voltage setpoint: 1.89 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsAttachment on the carrier
Result: Test passed
Environmental and real-life conditionsNeedle-flame test
Time of exposure: 30 s
Result: Test passed
Oscillation/broadband noise
Specification: DINÂENÂ50155 (VDEÂ0115-200):2018-05
Spectrum: Service life test categoryÂ1, classÂB, body mounted
Frequency: f1 = 5 Hz to f2 = 150 Hz
ASD level: 0.964 (m/s²)²/Hz
Acceleration: 0.58g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Pulse shape: Half-sine
Acceleration: 5g
Shock duration: 30Âms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60°C (max. operating temperature see derating curve)
Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24Âh, -60°C to +70°C)
Ambient temperature (assembly): -5°C ... 70°C
Ambient temperature (actuation): -5°C ... 70°C
Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulationsConnection in acc. with standard: IEC 61984
MountingMounting type: NS 35/7,5
NSÂ35/15
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00866.pdf

Approvals_01095.pdf

Manufacturer_declaration_05061.pdf

Safety_notes_00001.pdf

Technical_drawing_43500.pdf