Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2952363
PHOENIX CONTACT 2952363
PHOENIX CONTACTNot available

EMG 22-REL/KSR-G 24/TRN12 - Hybrid relay

Relay module, with miniature switching relay, with integrated NPN transistor control, for low control currents, contact (AgNi): medium to large loads, 1 changeover contact, 12 V DC nominal control voltage
Product Code: 2952363
Partner cod.: 2952363
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Download
Tecnichal data
NotesUtilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product propertiesProduct type: Relay Module
Product family: EMG
Application: Universal
Operating mode: 100% operating factor
Mechanical service life: approx. 5x 107 cycles
Insulation characteristics
Insulation: Basic insulation
Insulation characteristicsâۉ€¹
Insulation: Basic insulation
Overvoltage category: III
Pollution degree: 2
Electrical propertiesMaximum power dissipation for nominal condition: 0.5 W
Test voltage (Winding/contact): 4 kV AC (50ÂHz, 1Âmin., winding/contact)
Input dataCoil side
Nominal input voltage UN: 24 VÂDC
Input voltage range: 21.6 VÂDC ... 26.4 VÂDC (20°C)
Drive and function: monostable
Drive (polarity): polarized
Typical input current at UN: 21 mA
Typical response time: 9 ms
Typical release time: 10 ms
Protective circuit: Reverse polarity protection; Polarity protection diode
Freewheeling diode; Freewheeling diode
Operating voltage display: Yellow LED
Nominal control voltage: 12 VÂDC
Minimum control voltage: 5 VÂDC
Maximum control voltage: 13.2 VÂDC
Minimum control current: 0.5 mA
Maximum control current: 1 mA
Control
Nominal control voltage: 12 VÂDC
Minimum control voltage: 5 VÂDC
Maximum control voltage: 13.2 VÂDC
Minimum control current: 0.5 mA
Maximum control current: 1 mA
Output dataSwitching
Contact switching type: 1Âchangeover contact
Type of switch contact: Single contact
Contact material: AgNi
Maximum switching voltage: 250 V AC/DC
Limiting continuous current: 5 A
Maximum inrush current: 8 A
Interrupting rating (ohmic load) max.: 120 W (at 24 V DC)
60 W (at 48 V DC)
50 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
1250 VA (for 250 V AC)
Connection dataCoil side
Connection method: Screw connection
Stripping length: 8 mm
Screw thread: M3
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
Contact side
Connection method: Screw connection
Stripping length: 8 mm
Screw thread: M3
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
DimensionsWidth: 22.5 mm
Height: 75 mm
Depth: 62.5 mm
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -20°C ... 50°C
Ambient temperature (storage/transport): -20°C ... 70°C
Standards and regulationsStandards/regulations: IEC 60664
IEC 60664-1
MountingMounting type: DIN rail mounting
Mounting position: any
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00002.pdf

Application_note_00006.pdf

Manufacturer_declaration_00702.pdf

Manufacturer_declaration_01921.pdf

Manufacturer_declaration_03525.pdf

Manufacturer_declaration_03526.pdf

Manufacturer_declaration_16775.pdf

Technical_drawing_41293.pdf