2905293 PHOENIX CONTACT - Technology Bsa

RIF-0-OPT-24DC/24DC/2 - Solid-state relay module

Pre-assembled solid-state relay module with push-in connection, consisting of: relay base with ejector and plug-in miniature solid-state relay. Input voltage: 24 V DC. Output: 3 - 33 V DC/3 A

Product Code: 2905293

Partner cod.: 2905293

PHOENIX CONTACT

Product properties	Product type: Solid-state relay module Product family: RIFLINEÃcomplete Application: Universal Operating mode: 100% operating factor Insulation characteristics Insulation: Basic insulation Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 0.2 W Test voltage (Input/output): 2.5 kV_rms (50ÃHz, 1Ãmin., input/output) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VÃAC Rated surge voltage: 4 kV
Input data	Rated actuating voltage U_C: 24 VÃDC Voltage range with reference to U_C: 0.8 ... 1.2 Rated actuating current I_C: 8.5 mA Input voltage range: 19.2 VÃDC ... 28.8 VÃDC "0" signal switching threshold in reference to U_C: < 0.4 "1" signal switching threshold in reference to U_C: > 0.8 Typical response time: 20 Ãµs Typical turn-off time: 300 Ãµs Status display: Yellow LED Protective circuit: Freewheeling diode Transmission frequency: 300 Hz
Output data	Contact switching type: 1 N/O contact Design of digital output: electronic Output voltage range: 3 VÃDC ... 33 VÃDC Limiting continuous current: 3 A (see derating curve) Maximum inrush current: 15 A (10 ms) Surge voltage protection: > 33 V Voltage drop at max. limiting continuous current: < 200 mV Output circuit: 2-conductor, floating Protective circuit: Reverse polarity protection Surge protection Utilization category CB Scheme (IEC 60947-5-1): DC12, 3 A/24 V AC12, 0.75 A/250 V
Connection data	Connection method: Push-in connection Stripping length: 8 mm Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section flexible: 0.14 mm² ... 1.5 mm² 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) Conductor cross section AWG: 24 ... 16
Dimensions	Width: 6.2 mm Height: 93 mm Depth: 66 mm
Material specifications	Flammability rating according to UL 94: V2 (Housing)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C
Approvals	Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group ENÃ60068-2-60
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: DINÃENÃ60947-5-1
Mounting	Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any