2801219 PHOENIX CONTACT - Technology Bsa

PT-IQ-4X1-48DC-UT - Surge protection device

Surge protection, consisting of protective plug and base element, with integrated multi-stage status indicator on the module for four signal wires with common reference potential.

Product Code: 2801219

Partner cod.: 2801219

PHOENIX CONTACT

Notes	General Note: Remote signaling as well as the power supply of the DIN rail connector are established by snapping the module into place on the DIN rail connector.
Product properties	IEC test classification: C1 C2 C3 D1 Type: DIN rail module, two-section, divisible Product type: Surge protection for MCR technology Product family: PLUGTRAB IQ Surge protection fault message: Optical, multi-stage Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Nominal voltage U_N: 48 VÃDC
Connection data	Connection method: Screw connection Screw thread: M3 Tightening torque: 0.5 Nm Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section AWG: 24 ... 12
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/fc46ccf10e2bae4da270189f6d2038dc/-S204x204-FJPG Width: 17.7 mm Height: 91 mm Depth: 77.5 mm (incl. DIN rail 7.5Ãmm) Horizontal pitch: 1 Div.
Material specifications	Flammability rating according to UL 94: V-0 Housing material: PA 6.6
Mechanical properties	Mechanical data Open side panel: No
Protective circuit	Direction of action: Line-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground Maximum continuous voltage U_C: 53 VÃDC 37 VÃAC Rated current: 300 mA Operating effective current I_C at U_C: Ã¢Ã¢°¤ 6 ÃµA (per path) Residual current I_PE: Ã¢Ã¢°¤ 6 ÃµA (per path) Nominal discharge current I_n (8/20) Ãµs (line-ground): 10 kA Pulse discharge current I_imp (10/350)ÃÃµs (line-earth): 2.5 kA Total discharge current I_total (8/20)ÃÃµs: 20 kA Voltage protection level U_p (line-earth): Ã¢Ã¢°¤ 105 V (C1 - 1ÃkV / 500ÃA) Ã¢Ã¢°¤ 160 V (C2 - 10 kV / 5 kA) Ã¢Ã¢°¤ 90 V (C3 - 25ÃA) Response time t_A (line-earth): Ã¢Ã¢°¤ 1 ns Input attenuation aE, asym.: typ. 0.3 dB (Ã¢Ã¢°¤ 530 kHz / 150 Ã©) Cut-off frequency fg (3ÃdB), asym. (PE) in 150ÃÃ© system: typ. 1.9 MHz Capacity (line-signalground): typ. 1.5 nF Resistance per path: 1.2 Ã© Ã±5Ã% Surge protection fault message: Optical, multi-stage Max. required back-up fuse: 315 mA (FF) Impulse durability (line-earth): C1 - 1ÃkV / 500ÃA C2 - 10ÃkV / 5ÃkA C2 - 10ÃkA C3 - 25ÃA D1 - 2.5ÃkA Pulse reset time (line-earth): Ã¢Ã¢°¤ 1500Ãms
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢Ã¢°¤ 4000 m (amsl)
Standards and regulations	Standards/specifications: IEC 61643-21 ENÃ61643-21 ENÃ61000-6-3 ENÃ61000-6-2 Note: 2000 + A1:2008, modified 2001 + A1:2009 2007 + A1:2011 2005
Mounting	Mounting type: DIN rail: 35 mm