2701517 PHOENIX CONTACT - Technology Bsa

AXL E PN DIO16 M12 6M - Digital module

AxiolineE, Digital I/O device, PROFINET, M12 fast connection technology, Digital inputs: 16, 24 VDC, connection technology: 4-conductor, Digital outputs:16, 24 VDC, connection technology:3-conductor, Metal housing, degree of protection: IP65/IP67

Product Code: 2701517

Partner cod.: 2701517

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/a7ea2daf39eda94f8a0cd3e02b11c54f/-S204x204-FJPG Width: 60 mm Height: 185 mm Depth: 38 mm Drill hole spacing: 198.5 mm Note on dimensions: The height is 194.5mm including the mounting panel. With fixing clips pulled out, the height is 212mm. The depth is 38mm including the mounting panel (30.5mm without the mounting panel).
Material specifications	Housing material: Zinc die-cast
Interfaces	PROFINET Number of interfaces: 2 Connection method: M12 fast connection technology Note on the connection method: D-coded Number of positions: 4 Transmission speed: 100 Mbps (with auto negotiation) PROFINETÃ¢ Equipment type: PROFINET-Device System-specific protocols: PROFINET protocols LLDP PROFINET protocols MRP client PROFINET protocols DCP PROFINET protocols DCE/RPC Protocols supported: SNMP v1 HTTP TFTP FTP
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 types 1 and 3 Number of inputs: 16 Cable length: max. 30 m (to the sensor) Connection method: M12 connector, double occupancy Connection technology: 4-conductor Input voltage range "0" signal: 0 V ... 5 VDC Input voltage range "1" signal: 11 VDC ... 30 VDC Nominal input voltage U_IN: 24 VDC Nominal input current at U_IN: typ. 3 mA Sensor current per channel: typ. 75 mA (from U_S) Total sensor current: max. 1.2 A (per device) Input filter time: < 1000 µs Protective circuit: Overload protection, short-circuit protection of sensor supply
Output data	Digital Output name: Digital outputs Connection method: M12 connector, double occupancy Connection technology: 3-conductor Number of outputs: 16 Protective circuit: Overload protection, short-circuit protection of outputs; yes Output voltage: 24 VDC Limitation of the voltage induced on circuit interruption: -28 V ... -17 V Maximum output current per channel: 500 mA Nominal output voltage: 24 VDC (from voltage U_S) Output voltage range: 18 VDC ... 31.2 VDC Output voltage when switched off: max. 1 V Output current when switched off: max. 20 µA Nominal load, inductive: 12 VA (1.2 H, 48 Ã©, with nominal voltage) Nominal load, ohmic: 12 W (48 Ã©, with nominal voltage) Switching frequency: max. 5500 per second (with at least 50mA load current) max. 1 per second (with inductive load) Reverse voltage resistance to short pulses: Reverse voltage proof Behavior with overload: Auto restart Signal delay: max. 150 µs (when switched on) max. 200 µs (when switched off) Overcurrent shut-down: min. 0.7 A
Product properties	Type: Stand-Alone Product type: I/O component Product family: AxiolineE
Electrical properties	Potentials Voltage supply U_S: 24 VDC Power supply at U_S: max. 4 A Current consumption from U_S: typ. 8 mA max. 1.2 A Supply: Module electronics, sensors, and actuators Designation: Module electronics, sensors and actuators (U_S) Connection method: M12 connector (T-coded) Number of positions: 4 Supply voltage: 24 VDC Supply voltage range: 18 VDC ... 31.2 VDC (including all tolerances, including ripple) Current consumption: typ. 190 mA ±15% (at 24 V DC) max. 12 A Supply: Actuators Designation: Supply of actuators (U_A) for additional devices Connection method: M12 connector (T-coded) Number of positions: 4 Supply voltage: 24 VDC Supply voltage range: 18 VDC ... 31.2 VDC (including all tolerances, including ripple) Current consumption: typ. 3 mA ±15% (at 24 V DC) max. 12 A Electrical isolation/isolation of the voltage ranges Test voltage: 24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet1): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (communications power/sensor supply, digital inputs/outputs)/bus connection (Ethernet2): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (communications power/sensor supply, digital inputs/outputs)/FE: 500 VAC, 50 Hz, 1 min. Test voltage: Bus connection (Ethernet1)/FE: 500 VAC, 50 Hz, 1 min. Test voltage: Bus connection (Ethernet2)/FE: 500 VAC, 50 Hz, 1 min. Test voltage: Bus connection (Ethernet1)/bus connection (Ethernet2): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/24 V supply (communications power and sensor supply, digital inputs/outputs): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/bus connection (Ethernet1): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/bus connection (Ethernet2): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (actuator supply)/FE: 500 VAC, 50 Hz, 1 min.
Connection data	Connection method: M12 connector
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP65/IP67 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -25°C ... 85°C Permissible humidity (operation): 5 % ... 95 % Permissible humidity (storage/transport): 5 % ... 95 %
Standards and regulations	Protection class: III (IEC 61140, EN61140, VDE0140-1)
Mounting	Mounting type: Wall mounting or DIN rail mounting; both with mounting panel.