Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 1714984
PHOENIX CONTACTAvailable

MKDS 5/ 3-9,5 - PCB terminal block

PCB terminal block, nominal current: 32 A, rated voltage (III/2): 1000 V, nominal cross section: 4 mm2, number of potentials: 3, number of rows: 1, number of positions per row: 3, product range: MKDS 5, pitch: 9.52 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions!
Product Code: 1714984
Partner cod.: 1714984
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesType: PC terminal block can be aligned
Product line: COMBICON Terminals L
Product type: Printed circuit board terminal
Product family: MKDS 5
Number of positions: 3
Pitch: 9.52 mm
Number of connections: 3
Number of rows: 1
Number of potentials: 3
Pin layout: Linear pinning
Solder pins per potential: 1
Electrical propertiesNominal current IN: 32 A
Nominal voltage UN: 1000 V
Degree of pollution: 3
Rated voltage (III/3): 690 V
Rated surge voltage (III/3): 8 kV
Rated voltage (III/2): 1000 V
Rated surge voltage (III/2): 8 kV
Rated voltage (II/2): 1000 V
Rated surge voltage (II/2): 6 kV
Connection dataConnection technology
Type: PC terminal block can be aligned
Nominal cross section: 4 mm²
Conductor connection
Connection method: Screw connection with tension sleeve
Conductor cross section rigid: 0.2 mm² ... 6 mm²
Conductor cross section flexible: 0.2 mm² ... 4 mm²
Conductor cross section AWG: 24 ... 10
Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 4 mm²
2 conductors with same cross section, solid: 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible: 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.25 mm² ... 0.75 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 2.5 mm²
Stripping length: 8 mm
Tightening torque: 0.5 Nm ... 0.6 Nm
MountingMounting type: Wave soldering
Pin layout: Linear pinning
Drive form screw head: Slotted(L)
Connection method: Screw connection with tension sleeve
Material specificationsMaterial data - contact
Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material: Cu alloy
Surface characteristics: Tin-plated
Metal surface terminal point (top layer): Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer): Tin (4 - 8 µm Sn)
Material data - housing
Color (Housing): green (6021)
Insulating material: PA
Insulating material group: I
CTI according to IEC 60112: 600
Flammability rating according to UL 94: V0
Glow wire flammability index GWFI according to EN60695-2-12: 850
Glow wire ignition temperature GWIT according to EN60695-2-13: 775
Temperature for the ball pressure test according to EN60695-10-2: 125 °C
NotesNote on application: For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing).
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/158b0afe23d1ab408f646eacfe25f655/-S204x204-FJPG
Pitch: 9.52 mm
Width [w]: 28.56 mm
Height [h]: 26.5 mm
Length [l]: 12.5 mm
Installed height: 21.5 mm
Solder pin length [P]: 5 mm
Pin dimensions: 0.9 x 0.9 mm
PCB design
Hole diameter: 1.3 mm
Mechanical testsTest for conductor damage and slackening
Specification: IEC60999-1:1999-11
Result: Test passed
Pull-out test
Specification: IEC60999-1:1999-11
Conductor cross section/conductor type/tractive force setpoint/actual value: 0.2 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
6 mm² / solid / > 80 N
4 mm² / flexible / > 60 N
Electrical testsTemperature-rise test
Specification: IEC60947-7-4:2019-01
Requirement temperature-rise test: The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature.
Short-time withstand current
Specification: IEC60947-7-4:2019-01
Insulation resistance
Specification: IEC60512-3-1:2002-02
Insulation resistance, neighboring positions: >5MΩ
Air clearances and creepage distances |
Specification: IEC60664-1:2007-04
Insulating material group: I
Comparative tracking index (IEC60112): CTI 600
Rated insulation voltage (III/3): 690 V
Rated surge voltage (III/3): 8 kV
minimum clearance value - non-homogenous field (III/3): 8 mm
minimum creepage distance (III/3): 8 mm
Rated insulation voltage (III/2): 1000 V
Rated surge voltage (III/2): 8 kV
minimum clearance value - non-homogenous field (III/2): 8 mm
minimum creepage distance (III/2): 8 mm
Rated insulation voltage (II/2): 1000 V
Rated surge voltage (II/2): 6 kV
minimum clearance value - non-homogenous field (II/2): 5.5 mm
minimum creepage distance (II/2): 5.5 mm
Environmental and real-life conditionsVibration test
Specification: IEC60068-2-6:2007-12
Frequency: 10 - 150 - 10 Hz
Sweep speed: 1octave/min
5g (60.1Hz...150Hz)
Amplitude: 0.35mm (10Hz...60.1Hz)
Test duration per axis: 2.5 h
Glow-wire test
Specification: IEC60695-2-10:2013-04
Temperature: 850 °C
Time of exposure: 5 s
Aging
Specification: IEC60947-7-4:2019-01
Ambient conditions
Ambient temperature (operation): -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve)
Ambient temperature (storage/transport): -40 °C ... 70 °C
Relative humidity (storage/transport): 30 % ... 70 %
Ambient temperature (assembly): -5 °C ... 100 °C
Packaging specificationsType of packaging: packed in cardboard
Technical Specs
ECLASSECLASS-11.0: 27460101
ECLASS-12.0: 27460101
ECLASS-13.0: 27460101
ETIMETIM 9.0: EC002643
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00420.pdf

Approvals_00957.pdf

Approvals_01071.pdf

Data_sheet_02164.pdf

Manufacturer_declaration_05483.pdf

Technical_drawing_21520.pdf

Other products

Description other products