Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Log in to your account

Access services

Enter your reserved area

Log in to your account

||

PHOENIX CONTACT 1186510

PHOENIX CONTACT 1186510

Not available

PLC-FA-5X20 - Fuse adapter

Safety plug adapter for use on a 6.2mm PLC basic terminal block. For 5x20mm fuses. Operating voltage: Universal. Without fuse failure indication.

Product Code: 1186510

Partner cod.: 1186510

PHOENIX CONTACT

Tecnichal data

Download

Tecnichal data

Notes	General: If the fuse is faulty, the downstream circuit is off load.
Product properties	Product type: Adapter Product family: PLC-INTERFACE Application: Adapter Insulation characteristics Insulation: Safe isolation, reinforced insulation Insulation characteristics: Air clearances and creepage distances in a circuit Insulation: Safe isolation, reinforced insulation Overvoltage category: III Pollution degree: 2
Electrical properties	Fuse: G / 5 x 20 Air clearances and creepage distances in a circuit Rated insulation voltage: 250 VÃAC Rated surge voltage: 6 kV
Dimensions	Width: 6.2 mm Height: 80 mm Depth: 130 mm
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Degree of protection (Installation location): IP54 (Installation location) Ambient temperature (operation): -40°C ... 85°C (observe derating) Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢Ã¢°¤ 2000 m
Standards and regulations	Air clearances and creepage distances in a circuit Standards/regulations: DINÃENÃ50178
Mounting	Mounting position: any

Download

PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Approvals_01883.pdf

Approvals_01884.pdf

Technical_drawing_09919.pdf

Various_00040.pdf

Other products

Description other products

PHOENIX CONTACT 1186499

PLC-FA-I-5X20-12-24UC - Fuse adapter
Cod. Articolo: 1186499

Safety plug adapter for use on a 6.2mm PLC basic terminal block. For 5x20mm fuses. Operating voltage: 12...24VAC/DC. With LED for fuse failure indication.

PHOENIX CONTACT 2910526

PLC-RPT- 24UC/21-21AU/MS - Relay Module
Cod. Articolo: 2910526

PLC-INTERFACE, consisting of a relay base and pluggable multilayer gold contact relay with manual operation, integrated status LED, Push-in connection, 2 changeover contacts, Bridge rectifier, Input voltage: 24 V AC/DC

PHOENIX CONTACT 2909516

PLC-RPT-230UC/21-21/EX - Relay Module
Cod. Articolo: 2909516

PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with power contact, 2 changeover contacts, 230 V AC/220 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.