1076861 PHOENIX CONTACT - Technology Bsa

Input data	Input voltage: 24 VÃDC (SELV) Input voltage range: 22.5 VÃDC ... 30 VÃDC Fixed backup threshold: < 22 VÃDC > 30 VÃDC Current consumption I_N (U_N, I_OUT = I_N, I_charge = 0): 20 A Current consumption I_max (U_N, I_OUT = I_Stat.Boost, I_{charge = max}): 30 A Current consumption I_No-Load(U_N, I_OUT = 0, I_charge = 0): 0.1 A (No-load) Current consumption I_charge (U_N, I_OUT = 0, I_charge = max): 10 A (charging process) Power consumption P_max (U_N, I_OUT = I_Stat.Boost, I_charge = max): 599 W Power consumption P_N (U_N, I_OUT = I_N, I_charge = 0): 488 W Power consumption P_charge (U_N, I_OUT = 0, I_charge = max): 244 W Buffer time: 4 min. (2.5 A) 30 s (20ÃA) Charging time: approx. 6.3 min. (2.5 A) approx. 2.1 min. (10ÃA) Recharging time: approx. 5.4 min. (2.5 A) approx. 1.4 min. (10ÃA) Inrush current: Ã¢Ã¢°¤ 7 A (Ã¢Ã¢°¤Ã4Ãms) Switch-on time: 1 ms (buffer mode) Internal input fuse: no Dielectric strength: max. 35 VÃDC (Reverse polarity protection) Voltage drop, input/output: 0.5 VÃDC
Output data	Efficiency: > 98 % (with charged energy storage device) Connection in parallel: yes max. 4 Connection in series: No Mains operation Output voltage: 24 VÃDC Output current I_N: 20 A Static Boost (I_Stat.Boost): 25 A Output power P_OUT (U_N, I_OUT = I_N): 480 W Output power P_OUT (U_N, I_OUT = I_stat.Boost): 600 W Power dissipation No load (U_N, I_Out = 0, I_Charge = 0): 5 W Power dissipation Nominal load (U_N, I_Out = I_N, I_Charge = 0): 10 W Short-circuit-proof: yes (with input fuse) Idling-proof: yes Battery operation Output voltage: 24 VÃDC Output current I_N: 20 A Static Boost (I_Stat.Boost): 25 A Output power P_OUT (U_N, I_OUT = I_N): 480 W Output power P_OUT (U_N, I_OUT = I_stat.Boost): 600 W Power dissipation No load (U_N, I_Out = 0, I_Charge = 0): 5 W Power dissipation Nominal load (U_N, I_Out = I_N, I_Charge = 0): 90 W Short-circuit-proof: yes Idling-proof: yes
Energy storage	General Capacity: 16 kJ Storage medium: Double-layer capacitor Buffer time: 4 min. (2.5 A) 30 s (20ÃA)
Connection data	Input Position: 1.x Connection technology Position marking: 1.1Ã(+), 1.2 (+), 1.3 (-), 1.4 (-) Conductor connection Connection method: Screw connection rigid: 0.2 mm² ... 6 mm² flexible: 0.2 mm² ... 4 mm² flexible with ferrule without plastic sleeve: 0.25 mm² ... 4 mm² flexible with ferrule with plastic sleeve: 0.25 mm² ... 4 mm² rigid (AWG): 24 ... 10 Stripping length: 8 mm Tightening torque: 0.5 Nm ... 0.6 Nm Drive form screw head: Slotted L 2-conductor connection rigid: 0.2 mm² ... 1.5 mm² flexible: 0.2 mm² ... 1.5 mm² flexible with TWIN ferrule with plastic sleeve: 0.5 mm² ... 2.5 mm² Output Position: 2.x Connection technologyÃ¢Ã¢¬Ã¢¹ Position marking: 2.1Ã(+), 2.2Ã(-) Conductor connectionÃ¢Ã¢¬Ã¢¹ Connection method: Screw connection rigid: 0.2 mm² ... 6 mm² flexible: 0.2 mm² ... 4 mm² flexible with ferrule without plastic sleeve: 0.25 mm² ... 4 mm² flexible with ferrule with plastic sleeve: 0.25 mm² ... 4 mm² rigid (AWG): 24 ... 10 Stripping length: 8 mm Tightening torque: 0.5 Nm ... 0.6 Nm Drive form screw head: Slotted L 2-conductor connectionÃ¢Ã¢¬Ã¢¹ rigid: 0.2 mm² ... 1.5 mm² flexible: 0.2 mm² ... 1.5 mm² flexible with TWIN ferrule with plastic sleeve: 0.5 mm² ... 2.5 mm² Signal Position: 3.x Connection technologyÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Position marking: 3.1 (13), 3.2 (14), 3.3Ã(Alarm), 3.4 (Ready), 3.5 (Remote), 3.6 (Parallel Port), 3.7 (SGnd) Conductor connectionÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Connection method: Push-in connection rigid: 0.2 mm² ... 1 mm² flexible: 0.2 mm² ... 1.5 mm² flexible with ferrule without plastic sleeve: 0.2 mm² ... 1 mm² flexible with ferrule with plastic sleeve: 0.2 mm² ... 0.75 mm² rigid (AWG): 24 ... 18 Stripping length: 8 mm
Interfaces	Interface: EtherNet/IP (Modbus/TCP) Number of interfaces: 2 Connection method: RJ45 Position: 5.x Locking: Locking clip Transmission physics: Twisted-Pair Features: Autonegotiation Autocrossing Autopolarity Half- or full-duplex Topology: Star Line Ring Transmission speed: 10 Mbps ... 100 Mbps Transmission length: max. 100 m Cycle time: 30 ms (Default) Access time: Ã¢Ã¢°¤ 2 s Supported protocols: EtherNet/IP(Explicit Messaging, Implicit Messaging) BootP DHCP DLR Modbus/TCP Chipset: Renesas R-IN32M3 Electrical isolation: yes
Signaling	Signal state Remote Connection labeling: 3.5 Channel: DI (digital input) State (configurable): Remote State condition: Remote Low signal: Connection to SGnd with <Ã3ÃkÃ© High signal: Open Signal - state assignment: low - active Reference potential: 3.7 (SGnd, identical to1.3, 1.4, 2.2) Signal state Parallel port Connection labeling: 3.6 Channel: DIÃ/ÃDO (digital inputÃ/Ãdigital output) Switching input description: Connection terminal block communication, parallel operation State (configurable): Parallel Mode State condition (configurable): Not active:Ãnone Active: Output:Ãbuffer mode <1ÃV Output: mains operation 24ÃVÃ(U_N-1ÃVÃ(typical)) Input: Connected with SGnd: start buffer mode Switching voltage: < 1 V 24 V (U_N - 1ÃV (typical)) Current carrying capacity: 4 mA Reference potential: Different device, parallel port IN/OUT Signal state Alarm Connection labeling: 3.3 Channel: DO (digital output) Switching output: Transistor State (configurable): Group alarm State condition (configurable): Alarm threshold Output voltage: 26 V (U_N - 1ÃV (typical)) Output can be loaded: max. 20 mA State - signal assignment: active - low Reference potential: 3.7 (SGnd, identical to1.3, 1.4, 2.2) LED status indicator: red (Alarm) Signal state UIN OK Connection labeling: 3.1, 3.2 Channel: DO (digital output) Switching output: Electronic relays (OptoMOS) State (configurable): U_In OK State condition (configurable): U_InÃ>Ã22,5ÃVÃDC, U_InÃ<Ã30ÃVÃDC Output voltage: max. 30 V Output can be loaded: 300 mA State - signal assignment: active - high LED status indicator: green (U_In OK) Signal state Ready Connection labeling: 3.4 Channel: DO (digital output) Switching output: Transistor State (configurable): Ready State condition (configurable): State of charge = 100% or buffer mode Output voltage: 26 V (U_N - 1ÃV (typical)) Output can be loaded: max. 20 mA State - signal assignment: active - high Reference potential: 3.7 (SGnd, identical to1.3, 1.4, 2.2) LED status indicator: Green (state of charge - SOC) Signal ground SGnd Connection labeling: 3.7 Switching voltage: 0 V Current carrying capacity: max. 60 mA Function: Signal ground Reference potential: 3.3ÃAlarm, 3.4ÃReady, 3.5ÃRemote
Electrical properties	Insulation voltage input, output / housing: 500 V
Product properties	Product type: DC UPS with integrated capacitor Product family: QUINT capacity module MTBF (IEC 61709, SN 29500): 1351036 h (25Ã°C) 903325 h (40Ã°C) 470143 h (60Ã°C) Insulation characteristics Protection class: III (Special application (SELV)) Overvoltage category: II Degree of pollution: 2
Dimensions	Item dimensions Width: 244 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm Installation distance top/bottom: 50 mm / 50 mm
Mounting	Mounting type: DIN rail mounting Mounting position: horizontal DIN rail NS 35, EN 60715
Material specifications	Flammability rating according to ULÃ94 (housing / terminal blocks): V0 Housing material: Metal
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C (>Ã40Ã°C Derating: 1Ã%/K) Ambient temperature (storage/transport): -40°C ... 60°C Ambient temperature (start-up type tested): -40°C Maximum altitude: Ã¢Ã¢°¤ 4000 m Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): Ã¢Ã¢°¤ 95 % Shock: 30g, 18Ãms per spatial direction (in accordance with IEC 60068-2-27) Vibration (operation): 0,7g
Standards and regulations	Overvoltage category EN 61010-1: IIÃ(Ã¢Ã¢°¤Ã4000Ãm) ENÃ61010-2-201: IIÃ(Ã¢Ã¢°¤Ã4000Ãm) ULÃ60950-1: IIÃ(Ã¢Ã¢°¤Ã4000Ãm) Protective extra-low voltage Standard designation: Protective extra-low voltage Standards/specifications: IEC 61010-1 (SELV) IEC 61010-2-201 (PELV)
Approvals	UL Identification: ULÃ61010-1 ULÃ¢Ã¢¬Ã¢¹ Identification: ULÃ61010-2-201 ULÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Identification: ULÃ121201 ULÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Identification: CAN/CSA-C22.2 No.Ã61010-1-12 ULÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Identification: CAN/CSAÃC22.2ÃNo.Ã61010-2-201:14 ULÃ¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Identification: CSAÃC22.2ÃNo.Ã213-17 ClassÃI, DevsionÃ2, GroupsÃA,ÃB,ÃC,ÃD (HazardousÃLocation) CB scheme Identification: IEC 61010-1 IEC 61010-2-201 ENÃ61010-1 ENÃ61010-2-201
EMC data	Interference emission: Noise emission in accordance with ENÃ61000-6-3 and ENÃ61000-6-4 Noise immunity: Device immunity in accordance with EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: ENÃ61000-4-2 Electrostatic dischargeÃ¢Ã¢¬Ã¢¹ Contact discharge: 4 kV (Test Level 2) Discharge in air: 8 kV (Test Level 3) Comments: Criterion B Electromagnetic HF field Standards/regulations: ENÃ61000-4-3 Electromagnetic HF fieldÃ¢Ã¢¬Ã¢¹ Frequency range: 80 MHz ... 1 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: ENÃ61000-4-4 Fast transients (burst)Ã¢Ã¢¬Ã¢¹ Input: 2 kV (Test Level 3 - asymmetrical) Output: 2 kV (Test Level 3 - asymmetrical) Signal: 2 kV (Test Level 3 - asymmetrical) Comments: Criterion B Surge voltage load (surge) Standards/regulations: ENÃ61000-4-5 Conducted interference Standards/regulations: ENÃ61000-4-6 Conducted interferenceÃ¢Ã¢¬Ã¢¹ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.