1072654 PHOENIX CONTACT - Technology Bsa

EV-T2G3C-1AC20A-10,0M2,5ESBK01 - AC charging cable

CHARX connect comfort, AC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV) with alternating current (AC) via type2 vehicle charging inlets, with protective cap, Type2, IEC 62196-2, 20 A / 250 V (AC), housing: black, gray, PHOENIXCONTACT logo, cable: 10 m, black, straight, Ferrules, NOTE: Signal transmission is dependent on the cable length and may be adversely affected.

Product Code: 1072654

Partner cod.: 1072654

PHOENIX CONTACT

Product properties	Product type: AC charging cable Product family: CHARX connect comfort Application: for charging electric vehicles (EV) with alternating current (AC) via typeÃ2 vehicle charging inlets for installation at charging stations for electromobility (EVSE) Type: AC charging cable with vehicle charging connector and open cable end Design: with protective cap Affixed logo: PHOENIXÃCONTACT logo Charging mode: Mode 3, Case C Charging standard: TypeÃ2
Electrical properties	Type of signal transmission: Pulse width modulation Note on the connection method: Crimp connection, cannot be disconnected Coding: 680ÃÃ© (between PE and PP) Type of charging current: AC single-phase Charging power: 5 kW Charging current: 20 A Power contact Number: 3 (L1, N, PE) Rated voltage: 250 VÃAC Rated current: 20 A Signal contact Number: 2 (CP, PP) Rated voltage: 30 VÃAC Rated current: 2 A
Dimensions	Vehicle charging connector Width: 70 mm Height: 137 mm Depth: 215.9 mm
Material specifications	Color (Housing): black (9005) Color (Handle area): gray (7042) Color (Mating face): black (9005) Color (Protective cap): black (9005) Color (Cable): black (9005) Material (Vehicle charging connector): Plastic Material (Cable outer sheath): TPE-U Material (Contact surface): Silver
Cable/line	Cable length: 10 m Wiring standards/regulations: prENÃ50620/DINÃENÃ50620 Wiring certifications: VDE Cable weight: max. 163 kg/km Cable type: Class 5 straight Cable structure: 3 x 2.5 mm² + 1 x 0.5 mm² External cable diameter: 10.2 mm Ã±0.3Ãmm Outer sheath, material: TPE-U Stripping length of the sheath: 70 mm Ã±5Ãmm Cable resistance: Ã¢Ã¢°¤ 0.00798 Ã©/m (based on a power core, at an ambient temperature of 20°C) Bending radius: min. 153 mm (15x diameter)
Mechanical properties	Mechanical data Insertion/withdrawal cycles: > 10000 Insertion force: < 100 N Withdrawal force: < 100 N
Environmental and real-life conditions	Ambient conditions Degree of protection (Vehicle charging inlet): IP44 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) Degree of protection (Protective cap): IP54 Ambient temperature (operation): -40°C ... 50°C Ambient temperature (storage/transport): -40°C ... 80°C Altitude: 5000 m (above sea level)
Standards and regulations	Connection in accordance with standard Normative cable length restrictions: NOTE: Signal transmission is dependent on the cable length and may be adversely affected. The cable capacity must therefore be assessed in the overall system of the charging station and must not exceed 3100 pF (IEC 61851-1, Annex A, Table A.2, Note d). Interference-free V2G communication in accordance with ISOÃ15118 is not guaranteed for cable lengths over 10Ãm (ISOÃIEC 15118-3, A.11.3, Table A.11). Cable management is required in the US if the cable length exceeds 7.5Ãm (IEC 61851-1). Standards Standards/regulations: IEC 62196-2