1035480 PHOENIX CONTACT - Technology Bsa

Input data	Control input (configurable) Rem: Output power ON/OFF (SLEEP MODE) Default: Output power ON (>40 kÃ¢Ã¢¦/24 V DC/open bridge between Rem and SGnd) AC operation Network type: Star network Nominal input voltage range: 3x 400 V AC ... 500 V AC 2x 400 V AC ... 500 V AC Input voltage range: 3x 400 V AC ... 500 V AC -20 % ... +10 % 2x 400 V AC ... 500 V AC -10 % ... +10 % Typical national grid voltage: 400 V AC 480 V AC Voltage type of supply voltage: AC/DC Inrush current: typ. 2 A (at 25 °C) Inrush current integral (I²t): < 0.1 A²s Inrush current limitation: 3 A (after 1 ms) AC frequency range: 50 Hz ... 60 Hz -10 % ... +10 % Frequency range (f_N): 50 Hz ... 60 Hz -10 % ... +10 % Mains buffering time: Ã¢Ã¢°¥ 25 ms (3x 400 V AC) Ã¢Ã¢°¥ 25 ms (3x 480 V AC) Current consumption: 3x 0.99 A (400 V AC) 3x 0.81 A (480 V AC) 2x 1.62 A (400 V AC) 2x 1.37 A (480 V AC) 3x 0.8 A (500 V AC) 2x 1.23 A (500 V AC) Nominal power consumption: 541 VA Protective circuit: Transient surge protection; Varistor, gas-filled surge arrester Switch-on time: < 1 s Typical response time: 300 ms (from SLEEP MODE) Recommended breaker for input protection: 3x 4 A ... 20 A (Characteristic B, C or comparable) Recommended fuse for input protection: Ã¢Ã¢°¥ 300 V AC Discharge current to PE: < 3.5 mA 1.7 mA (550 V AC, 60 Hz) DC operation Nominal input voltage range: Ã± 260 V DC ... 300 V DC Input voltage range: Ã± 260 V DC ... 300 V DC -13 % ... +30 % Voltage type of supply voltage: AC/DC Current consumption: 1.23 A (Ã± 260 V DC) 1.06 A (Ã±300 V DC) Recommended breaker for input protection: 1x 6 A (10 x 38 mm, 30 kA L/R = 2 ms) Recommended fuse for input protection: Ã¢Ã¢°¥ 1000 V DC
Output data	Efficiency: typ. 93.9 % (400 V AC) typ. 93.8 % (480 V AC) Nominal output voltage: 26 V DC Setting range of the output voltage (U_Set): 24 V DC ... 29.5 V DC (constant capacity) Nominal output current (I_N): 20 A Static Boost (I_Stat.Boost): 25 A Dynamic Boost (I_Dyn.Boost): 30 A (5 s) Selective Fuse Breaking (I_SFB): 120 A (15 ms) Magnetic circuit breaker tripping: A1...A16 / B2...B13 / C1...C6 / Z1...Z16 Derating: > 60 °C (2.5 %/K) Feedback voltage resistance: Ã¢Ã¢°¤ 35 V DC Protection against overvoltage at the output (OVP): Ã¢Ã¢°¤ 32 V DC Control deviation: < 0.5 % (Static load change 10 % ... 90 %) < 3 % (Dynamic load change 10 % ... 90 %, (10 Hz)) < 0.25 % (change in input voltage Ã±10 %) Residual ripple: < 60 mV_PP (with nominal values) Short-circuit-proof: yes No-load proof: yes Output power: 480 W 600 W 720 W Apparent power: 686 VA (400 V, U_OUT = 24 V, I_OUT = stat. Boost) 698 VA (480 V, U_OUT = 24 V, I_OUT = stat. Boost) Maximum no-load power dissipation: < 7 W (400 V AC) < 7 W (480 V AC) Power loss nominal load max.: < 32 W (400 V AC) < 33 W (480 V AC) Power dissipation SLEEP MODE: < 5 W (400 V AC) < 5 W (480 V AC) Crest factor: typ. 1.78 (400 V AC) typ. 2.1 (480 V AC) Rise time: < 80 ms (U_Out = 10 % ... 90 %) Connection in parallel: yes, for redundancy and increased capacity Connection in series: yes Signal Signal ground SGnd: Reference potential for Out1, Out2, and Rem Signal Out 1 (configurable) Digital: 24 V DC 20 mA Default: 24 V DC 20 mA 24 V DC for U_Out > 0.9 x U_Set Signal Out 2 (configurable) Default: 24 V DC 20 mA 24 V DC for P_Out < 0,8 P_Nand 3 AC OK Signal relay 13/14 (configurable) Default: closed (U_out > 0.9 U_Set) Digital: 24 V DC 1 A 30 V AC/DC 0.5 A
Connection data	Input Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 4 mm² Conductor cross section AWG min.: 30 Conductor cross section AWG max.: 10 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Output Connection method: Screw connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 6 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 4 mm² Conductor cross section AWG min.: 30 Conductor cross section AWG max.: 10 Stripping length: 8 mm Tightening torque, min: 0.5 Nm Tightening torque max: 0.6 Nm Signal Connection method: Push-in connection Conductor cross section, rigid min.: 0.2 mm² Conductor cross section, rigid max.: 1.5 mm² Conductor cross section flexible min.: 0.2 mm² Conductor cross section flexible max.: 1.5 mm² Conductor cross section AWG min.: 24 Conductor cross section AWG max.: 16 Stripping length: 8 mm
Signaling	Signal output P_Out: > 100 % (LED lights up yellow, output power > 480 W) > 75 % (LED lights up green, output power > 360 W) > 50 % (LED lights up green, output power > 240 W) U_Out: > 0.9 x U_Set (LED lights up green) < 0.9 x U_Set (LED flashes green)
Electrical properties	Number of phases: 3.00 Insulation voltage input/output: 4 kV AC (type test) 2.4 kV AC (routine test) Insulation voltage output / PE: 0.5 kV DC (type test) 0.5 kV DC (routine test) Insulation voltage input / PE: 3.5 kV AC (type test) 2.4 kV AC (routine test) Switching frequency: 90.00 kHz ... 110.00 kHz (Auxiliary converter stage) 56.00 kHz ... 500.00 kHz (Main converter stage) 25.00 kHz ... 500.00 kHz (PFC stage)
Product properties	Product type: Power supply Product family: QUINT POWER MTBF (IEC 61709, SN 29500): > 985000 h (25 °C) > 638000 h (40 °C) > 311000 h (60 °C) Environmental protection directive: RoHS Directive 2011/65/EU WEEE Reach Insulation characteristics Protection class: I Degree of pollution: 2 Life expectancy (electrolytic capacitors) Current: 10 A Temperature: 40 °C Time: 344000 h Additional text: 400 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹ Current: 10 A Temperature: 40 °C Time: 320000 h Additional text: 480 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 20 A Temperature: 25 °C Time: 445000 h Additional text: 400 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 20 A Temperature: 25 °C Time: 432000 h Additional text: 480 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 20 A Temperature: 40 °C Time: 157000 h Additional text: 400 V AC Life expectancy (electrolytic capacitors)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Current: 20 A Temperature: 40 °C Time: 152000 h Additional text: 480 V AC
Dimensions	Dimensional drawing: https://caas.phoenixcontact.com/caas/v1/stable/media/170842/full/b1500?format=jpg Width: 70 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm Installation distance top/bottom: 30 mm / 30 mm Alternative assembly Width: 122 mm Height: 130 mm Depth: 73 mm
Mounting	Mounting type: DIN rail mounting Assembly note: alignable: P_N Ã¢Ã¢°¥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically alignable: P_N <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom Mounting position: horizontal DIN rail NS 35, EN 60715 With protective coating: no
Material specifications	Flammability rating according to UL 94 (housing / terminal blocks): V0 Housing material: Metal Hood version: Stainless steel X6Cr17 Side element version: Aluminum
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) Ambient temperature (storage/transport): -40 °C ... 85 °C Ambient temperature (start-up type tested): -40 °C Maximum altitude: Ã¢Ã¢°¤ 5000 m (> 2000 m, observe derating) Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): Ã¢Ã¢°¤ 95 % (at 25 °C, non-condensing) Shock: 18 ms, 30g, in each space direction (according to IEC 60068-2-27) Vibration (operation): 5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
Standards and regulations	Rail applications: EN 50121-3-2 EN 50121-4 EN 50121-5 IEC 62236-3-2 IEC 62236-4 IEC 62236-5 HART FSK Physical Layer Test Specification Compliance: Output voltage U_Out compliant Standard Ã¢Ã¢¬Ã¢ Electronic equipment for use in electrical power installations and their assembly into electrical power installations: EN 50178/VDE 0160 (PELV) Standard Ã¢Ã¢¬Ã¢ Limitation of mains harmonic currents: EN 61000-3-2 Standard - Electrical safety: IEC 60950-1/VDE 0805 (SELV) Standard Ã¢Ã¢¬Ã¢ Safety extra-low voltage: IEC 60950-1 (SELV) and EN 60204-1 (PELV) Standard - Safe isolation: DIN VDE 0100-410 Standard - safety for equipment for measurement, control, and laboratory use: IEC 61010-1 Standard - Safety of power supply units up to 1100 V (insulation distances): DIN EN 61558-2-16 Standard - Safety of transformers: EN 61558-2-16 (air clearances and creepage distances only) Standard - power supply devices for low voltage with DC output: EN 61204-3 Approval - requirement of the semiconductor industry with regard to mains voltage dips: SEMI F47-0706, EN 61000-4-11 Overvoltage category EN 60950-1: II EN 61010-1: II EN 62477-1: III
Approvals	CSA: CAN/CSA-C22.2 No. 60950-1-07 CSA-C22.2 No. 107.1-01 Shipbuilding approval: DNV GL, PRS, BV, LR, ABS UL approvals: UL Listed UL 508 UL/C-UL Recognized UL 60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)
EMC data	Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC EMC requirements for noise emission: EN 61000-6-3 EN 61000-6-4 EMC requirements for noise immunity: EN 61000-6-1 EN 61000-6-2 Conducted noise emission: EN 55016 EN 61000-6-3 (Class B) Noise emission: Additional basic standard EN 61000-6-5 (immunity in power station), IEC/EN 61850-3 (energy supply) EN 55016 EN 61000-6-3 (Class B) DNV GL conducted interference: Class A Additional text: Area power distribution Bridge and deck area DNV GL noise radiation: Class B Harmonic currents Frequency range: 0 kHz ... 2 kHz Flicker Frequency range: 0 kHz ... 2 kHz Electrostatic discharge Standards/regulations: EN 61000-4-2 Electrostatic dischargeÃ¢Ã¢¬Ã¢¹ Contact discharge: 8 kV (Test Level 4) Discharge in air: 15 kV (Test Level 4) Comments: Criterion A Electromagnetic HF field Standards/regulations: EN 61000-4-3 Electromagnetic HF fieldÃ¢Ã¢¬Ã¢¹ Frequency range: 80 MHz ... 1 GHz 1 GHz ... 6 GHz 1 GHz ... 6 GHz Test field strength: 20 V/m (Test Level 3) 10 V/m (Test Level 3) 10 V/m (Test Level 3) Comments: Criterion A Fast transients (burst) Standards/regulations: EN 61000-4-4 Fast transients (burst)Ã¢Ã¢¬Ã¢¹ Input: 4 kV (Test Level 4 - asymmetrical) Output: 4 kV (Test Level 3 - asymmetrical) Signal: 2 kV (Test Level 4 - asymmetrical) Comments: Criterion A Surge voltage load (surge) Standards/regulations: EN 61000-4-5 Surge voltage load (surge)Ã¢Ã¢¬Ã¢¹ Input: 3 kV (Test Level 4 - symmetrical) 6 kV (Test Level 4 - asymmetrical) Output: 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Signal: 1 kV (Test Level 2 - asymmetrical) Comments: Criterion A Conducted interference Standards/regulations: EN 61000-4-6 Conducted interferenceÃ¢Ã¢¬Ã¢¹ I/O/S: asymmetrical Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V (Test Level 3) Power frequency magnetic field Standards/regulations: EN 61000-4-8 Frequency: 16.67 Hz 50 Hz 60 Hz 50 Hz 60 Hz 0 Hz Test field strength: 100 A/m 1 kA/m 300 A/m Additional text: 60 s 3 s DC, 60 s Comments: Criterion A Frequency range: 50 Hz ... 60 Hz Voltage dips Standards/regulations: EN 61000-4-11 Voltage: 400 V AC Frequency: 50 Hz Voltage dip: 70 % 40 % 0 % Number of periods: 0.5 / 1 / 25 periods 5 / 10 / 50 periods 0.5 / 1 / 5 / 50 periods Additional text: Test Level 2 Comments: Criterion A: 0.5 / 1 period Criterion B: 25 periods Criterion B Criterion A: 0,5 / 1 period Criterion B: 5 / 50 periods Pulse-shape magnetic field Standards/regulations: EN 61000-4-9 Test field strength: 1000 A/m Comments: Criterion A Attenuated sinusoidal oscillations (ring wave) Standards/regulations: EN 61000-4-12 Input: 2 kV (Test Level 4 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Comments: Criterion A Asymmetrical conducted disturbance variables Standards/regulations: EN 61000-4-16 Test level 1: 50 Hz 60 Hz (Test Level 3) Voltage: 10 V (Permanent) 100 V (1 s) Test level 2: 0 Hz 16.67 Hz 50 Hz 60 Hz (Test Level 2) Comments: Criterion A Attenuated oscillating wave Standards/regulations: EN 61000-4-18 Input/Output/Signal: 0.5 kV (Test Level 2 - symmetrical) 1 kV (Test Level 2 - asymmetrical) Comments: Criterion A Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. Criterion C: Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.