Product Catalogue - Technology Bsa

Safety Control Relay, 8 Pole, 3 N.O. / 1 N.C. Base, 3 N.O. / 1 N.C. Auxiliary, 24V DC (w/Elec. Coil)

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 125 A, number of connections: 2, connection method: Screw connection, Rated cross section: 35 mm², cross section: 1.5 mm²-50 mm², mounting type: NS 35/7,5, NS35/15, color: gray

194E Accessories, Terminal Cover, 4 pole, 40 - 63 Amp , ,

100S-C Safety Contactor, 9A, Line Side, 24V DC (w/Elec. Coil), 3 N.O., 2 N.O. 3 N.C.

Component terminal block, with integrated 1N4007 diode, nom. voltage: 500 V, nominal current: 0.5 A, number of connections: 4, connection method: Push-in connection, Rated cross section: 2.5 mm², cross section: 0.14 mm²-4 mm², mounting type: NS 35/7,5, NS35/15, color: gray

440R Single Function Safety Relays, 1 N.C.,3 N.O., , 24V DC , Fixed,Automatic/Manual Reset

Component terminal block, The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A., with integrated diode, nom. voltage: 500 V, nominal current: 0.5 A, connection method: Screw connection, 1st and 2nd level, Rated cross section: 2.5 mm², cross section: 0.14 mm² - 4 mm², mounting type: NS 35/7,5, NS35/15, color: gray

92-39 Reflector

Inductive Prox Sensor,Plated Brass,12 mm Barrel Diameter,DC Standard,4 mm Sensing Distance,Normally Open Sourcing,Standard Barrel,4 Pin DC Micro QD,10-30V DC

Sensor/actuator cable, 3-position, free cable end, on Valve connector A, with 1 LED, connected with Z diode, cable length: 5 m

6.2 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 230 V AC/DC

Distributor box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 8, number of positions: 4, coding: A, slot assignment: single, status display: Yes, pnp; master cable connection: Fixed connection 180°, PUR/PVC, cable length: 5 m, shielding: no

Potential collective terminal, nom. voltage: 1000 V, nominal current: 101 A, number of connections: 5, connection method: Screw connection, Rated cross section: 35 mm², cross section: 1.5 mm²-50 mm², Push-in connection, Rated cross section: 10 mm², cross section: 0.5 mm²-10 mm², mounting type: NS 35/7,5, NS35/15, color: gray

Multi-channel electronic circuit breaker for protecting four loads at 24VDC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.

Bulletin 1489-M Thermal-magnetic Circuit Breakers, Standard configuration, AC, 2 Pole Configuration, Trip Curve C, UL/CSA Max. Voltage:480Y/277V AC, 96V DC; IEC/EN Max. Voltage: 400V AC,4A

Narrow Ethernet switch, five RJ45 ports with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS

Grip Switch (No Additional Buttons), 2 N.C. Main Contacts, 2 N.O. Monitoring Contacts, 8 Point Terminal Chamber with M20 Conduit & Cable Strain Relief

1492-FB Fuse Holder with 3 poles, Class J Type Fuses, 30A, Fuse Block without Indication, 600V AC/DC, Pkg. Qty. 2

Thermistor Monitoring Relay, , 24/48V AC/DC