2908804 PHOENIX CONTACT - Technology Bsa

Product properties	Product type: Repeater power supply Product family: MINI Analog Pro Application: Analog IN Type: Ex i signal conditioners with SIL functional safety Data management status Article revision: 02
Electrical properties	Line monitoring: Line fault detection Signal transmission behavior: In = Out Step response (10-90%): Ã¢Ã¢°¤ 10 ms Maximum temperature coefficient: Ã¢Ã¢°¤ 0.01 % Maximum transmission error: Ã¢Ã¢°¤ 0.1 % Reverse polarity protection: yes Electrical isolation Overvoltage category: II (Ã¢Ã¢°¤ 5000 m) Pollution degree: 2 (Ã¢Ã¢°¤ 5000 m) Electrical isolation Input/output/power supply IEC/EN 61010-1 Standards/regulations: IEC/EN 61010-1 Rated insulation voltage: 300 V_rms Test voltage: 2.5 kV AC (50 Hz, 60 s) Insulation: Double/reinforced insulation Electrical isolation Input/output, power supply IEC/EN 60079-11 Standards/regulations: IEC/EN 60079-11 Rated insulation voltage: 253 V_rms Electrical isolation Input/output/power supply IEC/EN 60079-7 Standards/regulations: IEC/EN 60079-7 Rated insulation voltage: 251 V_rms Supply Nominal supply voltage: 24 V DC Supply voltage range: 19.2 V DC ... 30 V DC Power consumption: Ã¢Ã¢°¤ 1.4 W
Input data	Signal: Repeater power supply operation Description of the input: Active current input, intrinsically safe Current input signal: 4 mA ... 20 mA Transmitter supply voltage: > 16 V (20 mA) > 15.75 V (21 mA) Signal: Signal conditioner operation Description of the input: Passive current input, intrinsically safe Current input signal: 4 mA ... 20 mA 0 mA ... 20 mA Voltage drop: < 4 V DC (20 mA)
Output data	Signal: Repeater power supply operation Output description: Current output Number of outputs: 1 Current output signal: 4 mA ... 20 mA Load/output load current output: Ã¢Ã¢°¤ 450 Ã© (20 mA) Ã¢Ã¢°¤ 420 Ã© (21 mA) Non-load voltage: Ã¢Ã¢°¤ 15 V DC Short-circuit-proof: yes Signal: Signal conditioner operation Output description: Current output Number of outputs: 1 Current output signal: 4 mA ... 20 mA 0 mA ... 20 mA Load/output load current output: Ã¢Ã¢°¤ 450 Ã© (20 mA) Ã¢Ã¢°¤ 420 Ã© (21 mA)
Connection data	Connection method: Push-in connection Stripping length: 10 mm Conductor cross section rigid: 0.2 mm² ... 2.5 mm² (with ferrule) 0.14 mm² ... 2.5 mm² (without ferrule) Conductor cross section flexible: 0.14 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 (flexible)
Ex data	Ex installation (EPL): Gc Div. 2 Ex i circuits (EPL): Ga Da Ma Div. 1 Safety data: Repeater power supply operation Max. output voltage U_o: 26.4 V Max. output current I_o: 98 mA Max. output power P_o: 647 mW Safety-related maximum voltage U_m: 253 V AC 125 V DC IIA/I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o: 10 mH / 2.48 ÃµF IIB/III (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o: 4 mH / 730 nF IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o: 2 mH / 92 nF IIA/I (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o: 10 mH / 496 nF, 1 mH / 556 nF, 500 ÃµH / 656 nF, 200 ÃµH / 836 nF, 100 ÃµH / 996 nF IIB/III (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o: 4 mH / 306 nF, 1 mH / 386 nF, 500 ÃµH / 466 nF, 200 ÃµH / 616 nF, 100 ÃµH / 736 nF IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o: 1.4 mH / 45 nF, 1 mH / 52 nF, 500 ÃµH / 69 nF, 200 ÃµH / 92 nF Safety data: Signal conditioner operation Input voltage U_i: 30 V Input current I_i: 150 mA Max. internal inductance L_i: negligible Max. internal capacitance C_i: 4 ÃµF Safety-related maximum voltage U_m: 253 V AC 125 V DC IIA/I (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o: 10 mH / 2.48 ÃµF IIB/III (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o: 4 mH / 730 nF IIC (simple circuit): Max. external inductivity L_o / Max. external capacitance C_o: 2 mH / 92 nF IIA/I (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o: 10 mH / 496 nF, 1 mH / 556 nF, 500 ÃµH / 656 nF, 200 ÃµH / 836 nF, 100 ÃµH / 996 nF IIB/III (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o: 4 mH / 306 nF, 1 mH / 386 nF, 500 ÃµH / 466 nF, 200 ÃµH / 616 nF, 100 ÃµH / 736 nF IIC (mixed circuit): Max. external inductivity L_o / Max. external capacitance C_o: 1.4 mH / 45 nF, 1 mH / 52 nF, 500 ÃµH / 69 nF, 200 ÃµH / 92 nF
Interfaces	Connection method: S-PORT Data communication (bypass) Protocols supported: HART-transparent Limit frequency (3 dB): Ã¢Ã¢°¥ 1.75 kHz
Signaling	Status display: Green LED (supply voltage)
Dimensions	Width: 6.2 mm Height: 109.81 mm Depth: 119.2 mm
Material specifications	Color: gray (RAL 7042) Housing material: PBT
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -40 °C ... 70 °C (Any mounting position) Ambient temperature (storage/transport): -40 °C ... 85 °C Permissible humidity (operation): 5 % ... 95 % (at 25 °C, non-condensing) Shock (operation): 15g (DIN EN 60068-2-27) Vibration (operation): 5g (DIN EN 60068-2-6) Altitude range (IEC/EN 61010-1) Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40 °C ... 63 °C Rated insulation voltage: 300 V_rms (Input/output/power supply) Insulation: Double/reinforced insulation Altitude range (IEC/EN 61010-1)Ã¢Ã¢¬Ã¢¹ Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40 °C ... 56 °C Rated insulation voltage: 300 V_rms (Input/output/power supply) Insulation: Double/reinforced insulation Altitude range (IEC/EN 61010-1)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40 °C ... 49 °C Rated insulation voltage: 150 V_rms (Input/output/power supply) Insulation: Double/reinforced insulation Altitude range (IEC/EN 60079-11) Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40 °C ... 63 °C Safety-related maximum voltage U_m: 121 V AC 110 V DC Rated insulation voltage: 150 V_rms (Input/output, power supply) Altitude range (IEC/EN 60079-11)Ã¢Ã¢¬Ã¢¹ Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40 °C ... 56 °C Safety-related maximum voltage U_m: 33 V AC/DC Rated insulation voltage: 60 V_rms (Input/output, power supply) Altitude range (IEC/EN 60079-11)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40 °C ... 49 °C Safety-related maximum voltage U_m: 33 V AC/DC Rated insulation voltage: 60 V_rms (Input/output, power supply) Altitude range (IEC/EN 60079-7) Height range: > 2000 m ... 3000 m Ambient temperature (operation): -40 °C ... 63 °C Rated insulation voltage: 162 V_rms (Input/output/power supply) Altitude range (IEC/EN 60079-7)Ã¢Ã¢¬Ã¢¹ Height range: > 3000 m ... 4000 m Ambient temperature (operation): -40 °C ... 56 °C Rated insulation voltage: 60 V_rms (Input/output/power supply) Altitude range (IEC/EN 60079-7)Ã¢Ã¢¬Ã¢¹Ã¢Ã¢¬Ã¢¹ Height range: > 4000 m ... 5000 m Ambient temperature (operation): -40 °C ... 49 °C Rated insulation voltage: 60 V_rms (Input/output/power supply)
Approvals	CE Certificate: CE-compliant ATEX Identification: Ã¯Ã II (1) G [Ex ia Ga] IIC Ã¯Ã II (1) D [Ex ia Da] IIIC Ã¯Ã II 3 (1) G Ex ec [ia Ga] IIC T4 Gc Ã¯Ã I (M1) [Ex ia Ma] I Certificate: BVS 23 ATEX 006 X IECEx Identification: [Ex ia Ga] IIC [Ex ia Da] IIIC Ex ec [ia Ga] IIC T4 Gc [Ex ia Ma] I Certificate: IECEx BVS 23.0003X UL, USA/Canada Identification: UL 61010-2-201 Safety Integrity Level (SIL, IEC 61508) Identification: 3 Note: Single-channel
EMC data	Electromagnetic compatibility: Tested in accordance with the following standards and regulations: EN 61326-1 For industrial use, NAMUR NE 21 Low Voltage Directive: Conformance with Low Voltage Directive Noise immunity: EN 61000-6-2 EN 61326-3-2 Noise emission: EN 61000-6-4
Mounting	Mounting type: DIN rail mounting Mounting position: any