Non disponibile 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/59fa0ee0b21ac04c822fa47148dec377/-S204x204-FJPG Width: 45 mm Height: 126.93 mm Depth: 75 mm Note on dimensions: The depth applies when a THÃ35-7.5 DIN rail is used (in accordance with ENÃ60715). |
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area Utilization restrictionââ¬Ã¢¹ CCCex note: Use in potentially explosive areas is not permitted in China. |
| Material specifications | Color: gray |
| Interfaces | Axioline P local bus Connection method: Connection for bus base module Transmission speed: 100 Mbps PROFINET No. of channels: 2 Connection method: RJ45 socket, auto negotiation and auto crossing Transmission speed: 100 Mbps (Full duplex) Transmission physics: Ethernet in RJ45 twisted pair Fieldbus: Local bus gateway Max. number of local bus devices: 63 (AXLÃPÃI/O modules. Consider the logic current consumed by the devices) |
| System properties | System limits Number of supported devices: max. 63 (per station) PROFINET Device function: PROFINET device |
| Product properties | Type: block modular Product type: I/O component Product family: Axioline P Mounting position: any Scope of delivery: including bus base module and connectors Insulation characteristics Overvoltage category: II Pollution degree: 2 |
| Electrical properties | Maximum power dissipation for nominal condition: 5 W Potentials Protective circuit: Surge protection of the supply voltage; electronic Polarity reversal protection of the supply voltage; electronic Potentials: Supply of the bus coupler Supply voltage: 24 VÃDC (UL) Supply voltage range: 19.2 VÃDC ... 30 VÃDC Current draw: 4.15 A (19.2 V DC) 125 mA (24ÃVÃDC) Potentials: Supply of the AxiolineÃP local bus U Supply voltage: 5 VÃDC (via bus base module) Current draw: 3 A (via bus base module) Potentials: Axioline P extension module supply voltage Supply voltage: UL (via bus base module) Current draw: 3 A (via bus base module) |
| Connection data | Connection technology Connection name: Power supply Note on the connection method: Please observe the information provided on conductor cross sections in the ââ¬Ã AxiolineÃP: system and installationâ⬠user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm Power supply Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the ââ¬Ã AxiolineÃP: system and installationâ⬠user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C (Mounting position: wall mounting on horizontal DIN rail) Air pressure (operation): 70 kPa ... 106 kPa (up to 2000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 2000Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
| Standards and regulations | Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1) |
| Approvals | ATEX Identification: ïà II 3 G Ex ec IIC T4 Gc Certificate: IBExU 18ATEXB018 X IECEx Identification: Ex ec IIC T4 Gc Certificate: IECEx IBE 18.0023X UKCAÃExÃ(UKEX) Identification: II 3G Ex ec IIC T4 Gc X Certificate: PxCAI22UKEx2316390X Ex data UL, USA / Canada: Class I, Div. 2, Groups A, B, C, D T4 Class I, Zone 2, IIC T4 |
| Mounting | Mounting type: DIN rail mounting Mounting position: any |
Di seguito alcuni articoli correlati a quello che stai vedendo
