Non disponibile 
| Formation: | [4x(2xAWG26/19)SN/ST]ST |
| installation type: | CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN |
| category: | ETHERNETî |
| standard/approval: | UL/CSA |
| shielding: | SHIELDED |
| group // 4x2xAWG26 | conductor material: Bare copper capillary diameter: - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) conductors number: 8 rated section: AWG26 AWG insulation material: Polyolefin colour: Orange-White, Green-White, Blue-White, Brown-White. intermediate taping make-up: Double FIRET with overlap on the each twisted pair material: Non-woven tape additional shield on make-up: On each twisted pair with non-woven, AL surface outside material: Aluminium/polyester tape shield shape: Overlapped shielding tape coverage: 100 drain wire: Not available shield on make-up: On each twisted pair with shield tape material: Tinned copper shield shape: Braid shield coverage: >=85 drain wire: Not available |
| total assembly make-up | total shield on make-up: On the total stranding material: Tinned copper shield shape: Braid shield coverage: >=85 % drain wire: Not available total taping on make-up: On the Shield material: Non-woven tape total sheath material: Polyurethane non-abrasive colour: Green RAL 6018 diameter (mm): 9±0.35 Marking Metric marking: P/N 39832 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V VW-1 - AWM I/II A/B 80°C 30V FT1 - ETHERNET CABLE CAT.7 PMXX-ST® [4x(2xAWG26)H/H2]H2 - year/week meter indication meter indication electrical features working voltage: 30 V test voltage: 1500/1min (C/C) e (C/S) V rated capacity: (c/c) <=48 pF/m rated impedance: 100±15&37; 1&247;250MHz - 100±20&37; 250&247;600MHz ohm electrical resistance: 149 ohm/km insulation resistance: 5000 transmission speed: Up to 10Gbit/s propagation speed: 68% attenuation: ------------------------------------------- ATTENUATION Frequency[MHz]/Attenuation. std(dB/100m)/Attenuation. typical[dB/100m] 1/3,1/2,5 - 4/5,7/5,2 - 10/8,9/8,3 - 16/11,2/10,4 - 20/12,6/11,6 - 31,25 100/28,7/27,7 - 155,52/36,2/35,5 - 250/46,6/45,6 - 500/67,9/67,2 - 600/7 dynamic features minimum bending radius static installation: 6 times ø cable minimum bending radius dynamic installation: 10 times ø cable working temperature static installation: -50°C / +80°C working temperature dynamic installation: -30°C / +70°C travel speed: Up to 300 m/min acceleration/deceleration: Up to 5 m/sec² cable length inside chain: Up to 15 m chain length notes: (horizontal only) guaranteed cycles: Up to 5 Mio notes: The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department. approvals and standards reference standards: 1581, UL 758(UL); C22.2 n° 210(CSA); ANSI/TIA/EIA 568-B.2-1; IEC 61156-6(EU); CEI EN 50288-5-2(EU); ISO/IEC 11801-1 (CL. E) ul csa approvals: RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V fire behaviour: FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) industrial oil resistance: 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 halogen free: SI UV resistance: UV RESISTANT Customs code Customs-tariff number: 85444993 Made in: IT |
Di seguito alcuni articoli correlati a quello che stai vedendo