Name: Technology BSA
Address: IT

Features

Number of positive action N/C contacts	2
Number of N/O contacts	2
Actuation directions	1

Safety-related parameters

B_10d parameter	5 x 10⁵ switching cycles (with small load)
Safe state in the event of a fault	The switch has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit.

Functions

Safe series connection

None, only individual wiring (with diagnostics)

Interfaces

Type of connection cable

Straight

Connection type	Cable open end
Length of cable	10 m
Cable diameter	8 mm
Conductor cross section	8 x 0.34 mm²
Bend radius (with fixed installation)	> 7.5 x cable diameter
Bend radius (with moving cable)	> 15 x cable diameter
Cable material	PUR
Conductor material	Copper

Electrical data

Switching principle	Slow action switching element
Number of positive action N/C contacts	2
Number of N/O contacts	2
Usage category	AC-15/DC-13 (EN 60947-5-1)
Rated operating current (voltage)	2 A (230 V AC) 2 A (24 V DC)
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	2,500 V
Short-circuit protection	2 A gG
Switching voltage	≥ 12 V DC
Switching current (switching voltage)	≥ 1 mA (24 V DC)

Mechanical data

Ambient data

Enclosure rating	IP67 (EN 60529)
Ambient operating temperature	–5 °C ... +50 °C
Storage temperature	–5 °C ... +50 °C

Classifications

Accedi ai servizi

E100-A2A22S10A SAFETY SWITCH