Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 440P-CSLS11D4
ROCKWELL AUTOMATION 440P-CSLS11D4
ROCKWELL AUTOMATION 440P-CSLS11D4
ROCKWELL AUTOMATIONNon disponibile

Bulletin 440P, Small Plastic IEC, Full Switch (Head <(>&<)> Body), Short Roller Lever, Snap Action, 1NO 1NC Circuits, 4-Pin DC M12 Quick Disconnect

Safety Limit Switch, 22mm Plastic, Short Lever, 1 N.C., 1 N.O., Snap Acting, 4-Pin DC Micro QD
Cod. Articolo: 440P-CSLS11D4
Cod. Fornitore: 440P-CSLS11D4
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Download
Caratteristiche Tecniche
Number of contacts as normally closed contact1
Number of contacts as normally open contact1
With status indicationNo
Type of electric connectionOther
Utilization categoryQ600/DC-13
Switching current, min25 mA @ 5V DC
Two-circuit 4-pin micro connector current2.5 A @ 250V DC
Auxiliary contacts1NO (with 2 NC)
Contact current rating (Ie)6 A @ 120V AC (Ue)
Thermal current (Ith)10 A
Actuation speed, min100 mm/min
Actuation speed, max250 mm/s
Actuation frequency, max6000 ops/hr
Rated insulation voltage600V AC
Suitable for safety functionsYes
Forced openingYes
Degree of protection (NEMA)1
Material housingPlastic
Degree of protection (IP)IP66
Number of pins4-pins
Contact typeSnap acting
Enclosure colorRed
Mounting2 x M4, any position
Body style22 mm small plastic body
Width41 mm
Height31 mm
Actuator typeShort roller lever
Mechanical life operations10000000 operations with no electrical load
Housing materialUL approved glass-filled polybutylene terephthalate
Connection typeDC micro
Construction type housingCuboid
Depth112 mm
Actuator materialVarious polymers and metals
Operating temperature-25 °C
Safety contacts1 NC snap acting, 2 NC, 3 NC or 4 NC slow acting
Pollution degree3
ShockIEC 60068-2-7 (30 Gn 3 pulses per axis)
VibrationIEC 60068-2-6 (10...55 Hz, 0.35 mm amplitude)