2080-RTD2 ROCKWELL AUTOMATION

Number of analogue inputs	2
Resolution of the analogue inputs	14 Bit
Resolution of the analogue outputs	14 Bit
Input, current	No
Input, voltage	No
Input, resistor	Yes
Input, resistance thermometer	No
Input, thermocouple	No
Input signal, configurable	No
Output, current	No
Output, voltage	No
Output signal configurable	No
Analogue inputs configurable	No
Analogue outputs configurable	No
Type of electric connection	Screw connection
Normal mode rejection ratio	70 dB @ 50/60 Hz
Accuracy	Ã±1.0 Ã°C @ 25 Ã°C (77 Ã°F)
Wire size	Solid: 0.14 mm2 (26 AWG)...1.5 mm2 (16 AWG) @ Rated @ 90 Ã°C (194 Ã°F) insulation maximum, Stranded: 0.14 mm2 (26 AWG)...1.0 mm2 (18 AWG) @ Rated @ 90 Ã°C (194 Ã°F) insulation maximum
Open circuit detection time	8 to 1212
Suitable for safety functions	No
SIL according to IEC 61508	None
Common mode rejection ratio	100 dB @ 50/60Hz
RTD types supported	100 Ã© Platinum 385, 200 Ã© Platinum 385, 500 Ã© Platinum 385, 1000 Ã© Platinum 385, 100 Ã© Platinum 392, 200 Ã© Platinum 392, 500 Ã© Platinum 392, 1000 Ã© Platinum 392, 10 Ã© Copper 427, 120 Ã© Nickel 672, 604 Ã© Nickel-Iron 518
Surrounding air temperature, max	65 Ã°C
North American temperature code	T4
Power consumption	40 mA @ 3.3V
Emissions	CISPR 11 (IEC 61000-6-4): Class A
ESD immunity	IEC 61000-4-2: 6 kV contact discharges, 8 kV air discharges
EFT/B immunity	IEC 61000-4-4: Ã±2 kV @ 5 kHz on shielded ports
Conducted RF immunity	IEC 61000-4-6, 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
Surge transient immunity	IEC 61000-4-5: Ã±2 kV line-earth(CM) on shielded ports
Operating temperature	-20...65 Ã°C (-4...149 Ã°F): IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, operating dry heat), IEC 60068-2-14 (Test Nb, operating thermal shock)
Radiated RF immunity	IEC 61000-4-3: 10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz,
Nonoperating temperature	-40...85 Ã°C (-40...185 Ã°F), IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
Vibration	IEC 60068-2-6 (Test Fc, operating), 2 G @ 10...500 Hz
Shock	IEC 60068-2-27 (Test Ea, unpackaged shock): DIN rail mount: 25 g, nonoperating, Panel Mount: 35 g nonoperating
Mounting torque	0.2 Nm
Terminal screw torque	0.22...0.25 Nm (1.95...2.21 lb-in) (using a 2.5 mm (0.10 in.) flat-blade screwdriver)
Input impedance	>5 MÃ©
Explosion safety category for gas	None
Explosion safety category for dust	None