Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 140G-K3F3-D30-CJ
ROCKWELL AUTOMATIONNon disponibile

Molded Case Ckt-Bkr, 400A K Frame, 35 kA at 480V, T/M - Adjst Thrm / Adjst Mgntc, 3 Poles, 300A, 80 Percent MCCB, No Bus Bar Mounting, NONE, 24V AC/DC, NONE, 3 Aux + Alarm

140G - Molded Case Circuit Breaker, K frame, 35 kA Interrupt Rating, T/M - Thermal Magnetic, 3 Poles, Rated Current 300 A (80% Rated), 3 No/NC AUX + Alarm, 24V
Cod. Articolo: 140G-K3F3-D30-CJ
Cod. Fornitore: 140G-K3F3-D30-CJ
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Number of poles3
Number of auxiliary contacts as change-over contact3
With integrated under voltage releaseNo
Integrated earth fault protectionNo
Complete device with protection unitYes
Rated permanent current Iu300 A
Type of control elementToggle
Rated impulse withstand voltage (Uimp)8 kV
Frame size400 A
Current range80% MCCB
Thermal trip current (Ir)210 A
Magnetic trip current (Im)1500 A
Voltage for reverse-fed circuit breaker, max690V AC per IEC
Watt lossThermal magnetic type: 40.8 W
Insulation voltage (Ui)Rated 1000V per IEC
Thermal trip rating, max300 A @ ambient temperature 40 °C
Electrical life cycle7000 (400 A)/5000 (600 A) @ 415V AC
Interrupting rating35 kA @ 500V DC, 2-pole in series, thermal-magnetic trip only per NEMA, UL, CSA
Rated ultimate short-circuit breaking capacity (Icu)IEC 60947-2: 85 kA @ 220...230V AC, 50/60 Hz
Rated service short-circuit breaking capacity (Ics)IEC 60947-2: 100% Icu @ 750V DC, 3-poles in series, thermal-magnetic trip units only
Protection typeT/M-adjustable thermal/adjustable magnetic TMA
Motor drive integratedNo
With switched-off indicatorNo
Motor drive optionalYes
Position of connection for main current circuitFront side
Type of electrical connection of main circuitScrew connection
Suitable for DIN rail (top hat rail) mountingNo
DIN rail (top hat rail) mounting optionalNo
Degree of protection (IP)IP40
Weight7.17 lb
Mechanical life operations20000 /h
Vibration2...13.2 Hz ±1 mm, 13.2...100 Hz ±0.7 G
ShockPeak acceleration: 150 m/s^2 peak, pulse duration 11 ms
Factory option3 NO/NC auxiliary + 1 alarm, 24V AC/DC
Height205 mm
Device constructionBuilt-in device fixed built-in technique
Width140 mm
Depth108.5 mm
Storage temperature-40 °F
Wire temperature ratingAl or Cu 75°C
Operational voltage (Ue)90% of voltage rating @ 3000 meter (9840 ft) altitude
Rated uninterrupted current (Iu)98% of current rating @ 3000 meter (9840 ft) altitude
Ambient temperature without derating104 °F