Automazione Industriale


Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione


Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata


Miniature Contactor, 5 A, IEC, 12V 50/60Hz, 3 N.O. Poles, 1 N.O. Auxiliary Contact, Screw Type Terminals, Single Pack: Quantity of 1

Miniature Contactor, Screw Type Terminals, 5A, System Control Voltage: 12V 50/60Hz, 3 N.O. Main Contacts, 1 N.O. Auxiliary Contact, 1
Cod. Articolo: 100-K05KQ10
Cod. Fornitore: 100-K05KQ10

Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Number of normally open contacts as main contact3
Number of auxiliary contacts as normally open contact1
Vibration resistanceIEC 60068-2
Shock resistanceIEC 60068-2
Altitude, max2000 m (NN) per IEC 60947-4
LifespanMechanical DC control: 15000000 ops
Switching frequency, max250 ops/h, AC-4 (approximately 200000 operations)
Recommended torque10.6
WeightDC: 0.2 kg
Conductor cross sectionMain contact, 2 conductor: 1...2.5 mm^2 + 1...4 mm^2
Protection classIP2X
Voltage type for actuatingAC
Rated control supply voltage at AC 50 Hz12 V
Rated control supply voltage at AC 60 Hz12 V
Rated control supply voltage at DC0 V
Type of electrical connection of main circuitScrew connection
Rated impulse withstand voltage (Uimp)6 kV
Optional overload relaysBimetallic
Main current circuit resistance2.2 mOhm
Power dissipation (all circuits)0.3 W @ 400V, AC-3, Ie
Rated filament current5 A @ 230/240V, AC-5b
Rated isolation voltage (Ui)IEC: 690V, UL, CSA: 600V
Switching of motor load6 A @ 400V, AC-7b (50 Hz)
PackagingSingle pack (quantity of 1)
Auxiliary contactsIP2X
Rated current (enclosed)9.8 A @ 115V, 1-phase per UL/CSA
Rated power (enclosed)3 Hp @ 575V, 3-phase per UL/CSA
Auxiliary contact configuration1 NO
Capacitance, max750 µF @ short-circuit current of 10 kA
General purpose current (enclosed)12 A per UL/CSA
Operating time, closing delay6...12 ms DC (conventional)
Switching of low inductive loads20 A @ 400V, AC-7a per IEC 61095 (50 Hz)
Short time withstand (Icw)60 A for 10 s, 60 °C
Operating time, opening delay8...12 ms with integrated diode
Coil consumption, hold-inCold 3.0 W, warm 2.6 W DC (conventional)
Coil consumption, pick-upCold 3.0 W, warm 2.6 W DC (conventional)
Total power dissipationDC control: 2.9 W @ 400V, AC-3, Ie
Operating limits, dropout(0.2...0.75) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of lampsGas discharge lamps, open: 18 A @ 40 °C, AC-5a
Insulation class of the coilClass F per IEC 60085, Class 105 insulation system per UL 508
Rating for switching AC motors3-poles: 3 Hp @ 575V (AC-2, AC-3, AC-4), 3-phase (60 Hz)
Switching of hermetically sealed cooling compressor motors11 A @ 400V, AC-8a (manual reset of overload release (50 Hz))
Operating limits, pick-up(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
UL class K5 and RK5 fuses rating40 A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
DIN fuses (gG, gL) current ratingType 2 (per IEC 60947-4-1): 16 A @ 400 V, 50 kA available fault current
Rated operational current (Ie)8.5 A @ 415V, Star-Delta starting (50 Hz)
UL class J and CSA HRCI-J fuses rating30 A @ 600V, 50 kA available fault current per UL 508 and CSA 22.2 No. 14
Switching of power transformersApparent power: 2 kVA @ 500V, AC-6a, 50 Hz (n = 30)
Rated operational power (Pe)8.3 kW @ 240V, AC-1 (50 Hz), ambient temperature 40 °C
Switching of DC loads3-poles in series: 6 A @ 48/60V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
Optional accessoriesFront-mount auxiliary contacts, surge suppressors, electronic timers, mechanical interlocks
FeaturesMini-contactors, Uniform panel mounting dimensions, Panel mounting or mounting on 35 mm DIN Rail, Made of environmentally friendly materials
UL class CC and CSA HRCI-MISC fuses rating30 A @ 600V, 50 kA available fault current per UL 508 and CSA 22.2 No. 14
Climatic withstandIEC 60068-2-30
Ambient temperatureStorage: -55...80 (-67...176)