Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PROSOFT TECHNOLOGY PLX32-MBTCP-SIE
PROSOFT TECHNOLOGYNon disponibile

Modbus TCP/IP to Siemens Industrial Ethernet Communication Gateway

Cod. Articolo: PLX32-MBTCP-SIE
Cod. Fornitore: PLX32-MBTCP-SIE
PROSOFT TECHNOLOGY


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Caratteristiche Tecniche
Features and Benefits
Two separate Ethernet ports allow each protocol to reside on separate subnets. This allows you to pass data between the two subnets without changing each device’s IP address to be on the same subnet.
In addition to S7 controllers, the gateway can also be used with Siemens S5 controllers with an appropriate interface.
Gateway includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
Specifiche
Specifications
Supported Modbus Function Codes:Read Coil Status
Supported Modbus Function Codes:Read Input Status
Supported Modbus Function Codes:Read Holding Registers
Supported Modbus Function Codes:Read Input Registers
Supported Modbus Function Codes:Force (Write) Single Coil
Supported Modbus Function Codes:Preset (Write) Single Holding Register
Supported Modbus Function Codes:Force (Write) Multiple Coils
Supported Modbus Function Codes:Preset (Write) Multiple Holding Registers
Supported Modbus Function Codes:Mask Write Holding Register (Slave Only)
Supported Modbus Function Codes:Read/Write Holding Registers (Slave Only)
Supported Clients:10
Supported Servers:MBAP - 5
Supported Servers:Encapsulated - 5
Command List:Up to 160 fully configurable Client commands
Status Data:Error codes reported individually for each command
Command List Polling:Each command can be individually enabled or disabled; write-only-on-data-change is available
Descrizione
ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernetgateway allows high speed bi-directional data transfers betweenSchneider Electric® PACs and Siemens S7 and S5 PACs. Two ports allow each protocol to reside on separate subnets, allowingyou to pass data between the two subnets without changing eachdevice’s IP address.