Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata
Accedi al B2B
Accedi al tuo account

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account
Paese|
||Carrello
Technology BSA logo
Logo Rockwell Automation partner - Value Add Distributor
PHOENIX CONTACT 3244561
PHOENIX CONTACT 3244561
PHOENIX CONTACTDisponibile

PTIO-IN 2,5/3-LED 24 GN - Initiator/actuator terminal block

Initiator/actuator terminal block, Power terminal, nom. voltage: 24 V, nominal current: 13.5 A, number of connections: 2, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.2 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: orange
Cod. Articolo: 3244561
Cod. Fornitore: 3244561
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Descrizione
Caratteristiche Tecniche
Product propertiesProduct type: Sensor/actuator terminal block
Number of connections: 2
Number of rows: 3
Potentials: 2
Data management status
Article revision: 03
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 4 kV
Connection dataNumber of connections per level: 2
Nominal cross section: 2.5 mm²
Note: Please observe the current carrying capacity of the DIN rails.
Stripping length: 8 mm ... 10 mm
Internal cylindrical gage: A3
Connection in acc. with standard: IEC 60947-7-1
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Cross section AWG: 24 ... 12 (converted acc. to IEC)
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible [AWG]: 24 ... 14 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.2 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.2 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm²
Nominal current: 13.5 A
Maximum load current: 13.5 A
Nominal voltage: 24 V
Connection cross sections directly pluggable
Conductor cross section rigid: 0.34 mm² ... 4 mm²
Conductor cross-section flexible (ferrule without plastic sleeve): 0.34 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.34 mm² ... 2.5 mm²
DimensionsWidth: 7 mm
End cover width: 2.2 mm
Height: 74.4 mm
Depth on NS 35/7,5: 41.5 mm
Depth on NS 35/15: 49 mm
Material specificationsColor: orange (RAL 2003)
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130 °C
Relative insulation material temperature index (Elec., UL 746 B): 130 °C
Electrical testsSurge voltage test
Test voltage setpoint: 4.8 kV
Result: Test passed
Temperature-rise test
Requirement temperature-rise test: Increase in temperature ≤ 45 K
Result: Test passed
Short-time withstand current 4 mm²: 0.36 kA
Power-frequency withstand voltage
Test voltage setpoint: 1.5 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsMechanical strength
Result: Test passed
Attachment on the carrier
DIN rail/fixing support: NS 35
Test force setpoint: 1 N
Result: Test passed
Test for conductor damage and slackening
Rotation speed: 10 rpm
Revolutions: 135
Conductor cross section/weight: 0.2 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Result: Test passed
Environmental and real-life conditionsAging
Temperature cycles: 192
Result: Test passed
Needle-flame test
Time of exposure: 30 s
Result: Test passed
Oscillation/broadband noise
Specification: DIN EN 50155 (VDE 0115-200):2008-03
Spectrum: Service life test category 2, bogie-mounted
Frequency: f1 = 5 Hz to f2 = 250 Hz
ASD level: 6.12 (m/s²)²/Hz
Acceleration: 3.12g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Specification: DIN EN 50155 (VDE 0115-200):2008-03
Pulse shape: Half-sine
Acceleration: 30g
Shock duration: 18 ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.)
Ambient temperature (storage/transport): -25 °C ... 60 °C (for a short time, no longer than 24 h, -60 °C to +70 °C)
Ambient temperature (assembly): -5 °C ... 70 °C
Ambient temperature (actuation): -5 °C ... 70 °C
Permissible humidity (operation): 20 % ... 90 %
Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulationsConnection in acc. with standard: IEC 60947-7-1
MountingMounting type: NS 35/7,5
NS 35/15
Descrizione
PTIO-IN 2,5/3-LED 24 GN Mors. per sen/att