Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 2885773
PHOENIX CONTACT 2885773
PHOENIX CONTACTNon disponibile

EMD-FL-3V-230 - Monitoring relay

Monitoring relay for monitoring 3-phase voltages of 160…300 V AC, undervoltage, window, phase sequence, phase failure, asymmetry, wide range power supply unit, 2 changeover contacts
Cod. Articolo: 2885773
Cod. Fornitore: 2885773
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Download
Caratteristiche Tecniche
NotesUtilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product propertiesProduct type: Voltage monitoring relay
Operating mode: 100% operating factor
Mechanical service life: approx. 2x 107 cycles
Insulation characteristics
Insulation: Basic insulation
Insulation characteristics​
Insulation: Basic insulation
Overvoltage category: III
Pollution degree: 2
Electrical propertiesService life electrical: 2x 105 cycles at ohmic load, 1000 VA
Mains type: 3-phase
Rated insulation voltage: 300 V
Rated surge voltage: 4 kV
Supply
Supply voltage range: 24 VAC ... 240 VAC -15%...+10%
24 VDC ... 240 VDC -20%...+25%
Nominal power consumption: 4.5 VA (1.5W)
Input dataInput name: Measuring input
Measured value: AC sine (48 Hz ... 63 Hz)
Protection: ≤ 20 A
Nominal input voltage UN: 3 N ~ 230/132 V
Maximum input voltage: 345 V (3 N ~ 345/199 V)
Input resistance of voltage input: 470 kΩ
Frequency range: 48 Hz ... 400 Hz
Maximum temperature coefficient: < 0.1 %/K
Setting range for response delay: 0.1 s ... 10 s
Min. setting range: -30 % ... 20 % (From UN)
Max. setting range: -20 % ... 30 % (From UN)
Min setting range of the voltage threshold value: 161 VAC ... 276 VAC
Max. setting range of the voltage threshold value: 184 VAC ... 299 VAC
Function: Undervoltage
Window
Asymmetry
Phase sequence
Phase failure
Basic accuracy: ± 5 % (of scale end value)
Setting accuracy: ≤ 5 % (of scale end value)
Repeat accuracy: ≤ 2 %
Asymmetry: 5% ... 25% / OFF
Recovery time: 500 ms
Output dataSwitching
Contact switching type: 2 floating changeover contacts
Maximum switching voltage: 250 VAC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.: 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse: 5 A (fast-blow)
Connection dataConnection method: Screw connection
Stripping length: 8 mm
Conductor cross section rigid: 0.5 mm² ... 2.5 mm²
Conductor cross section flexible: 0.25 mm² ... 2.5 mm²
Conductor cross section AWG: 20 ... 14
DimensionsWidth: 22.5 mm
Height: 90 mm
Depth: 113 mm
Material specificationsHousing insulation material: Polyamide PA, self-extinguishing
Environmental and real-life conditionsAmbient conditions
Degree of protection (Housing): IP40 (Housing)
Degree of protection (Connection terminal blocks): IP20 (Connection terminal blocks)
Ambient temperature (operation): -25°C ... 55°C
-25°C ... 40°C (corresponds to UL508)
Ambient temperature (storage/transport): -25°C ... 70°C
Climatic class: 3K3 (in acc. with EN 60721)
Permissible humidity (operation): 15 % ... 85 %
ApprovalsCE
Certificate: CE-compliant
UL, USA/Canada
Identification: UL/C-UL Listed UL 508
EMC dataLow Voltage Directive: Conformance with Low Voltage Directive
Noise immunity: EN 61000-6-2
Electromagnetic compatibility: Conformance with EMC directive
Noise emission: EN 61000-6-4
Standards and regulationsStandards/regulations: EN50178
MountingMounting type: DIN rail mounting
Assembly instructions: on standard DIN rail NS 35 in accordance with EN 60715
Mounting position: any
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Data_sheet_03700.pdf

Manufacturer_declaration_01582.pdf

Manufacturer_declaration_04697.pdf

Package_slip_00999.pdf

Technical_drawing_39164.pdf