2702783 PHOENIX CONTACT - Technology Bsa

AXL F DI8/2 24DC 1F - Digital module

AxiolineF, Digital input module, Digital inputs: 8, 24 VDC, connection technology: 2-conductor, corresponds to standard IEC 61850-3, transmission speed in the local bus:100 Mbps, degree of protection: IP20, including bus base module and AxiolineF connectors

Cod. Articolo: 2702783 Copia - Copy

Cod. Fornitore: 2702783 Copia - Copy

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/c1416576ed7aaf4e91ee7183ca7f3cde/-S204x204-FJPG Width: 53.6 mm Height: 126.1 mm Depth: 54 mm Note on dimensions: The depth applies when a THÃ35-7.5 DIN rail is used (in accordance with ENÃ60715).
Interfaces	AxiolineÃFÃlocal bus Number of interfaces: 2 Connection method: Bus base module Transmission speed: 100 Mbps
System properties	Module Input address area: 1 Byte Output address area: 0 Byte Required parameter data: 3 Byte Required configuration data: 6 Byte
Input data	Digital Input name: Digital inputs Description of the input: EN 61131-2 type 1 Number of inputs: 8 Connection method: Push-in connection Connection technology: 2-conductor Input voltage: 24 VÃDC (Nominal voltage) max. 100 VÃDC Input voltage range: -100 VÃDC ... 100 VÃDC Input voltage range "0" signal: -5 VÃDC ... 5 VÃDC Input voltage range "1" signal: 14.5 VÃDC ... 100 VÃDC Nominal input voltage U_IN: 24 VÃDC Nominal input current at U_IN: 2.5 mA Input filter time: < 1 ms Protective circuit: Polarity reversal protection of the inputs
Product properties	Type: block modular Product type: I/O component Product family: AxiolineÃF Mounting position: any (no temperature derating) Nominal mounting position: wall mounting on horizontal DIN rail Scope of delivery: including bus base module and AxiolineÃF connectors Insulation characteristics Overvoltage category: III (EN 61010-2-201/IEC 61010-2-201) Pollution degree: 2
Electrical properties	Potentials: AxiolineÃF local bus supply (U Supply voltage: 5 VÃDC (via bus base module) Current draw: max. 120 mA Power consumption: max. 600 mW Electrical isolation/isolation of the voltage ranges Test voltage: I/Os / logic: 4 kV 5 kV Test voltage: I/O/functional ground: 4 kV 5 kV Test voltage: I/O / I/O (adjacent connectors): 2.5 kV Test voltage: Logic/functional ground: 1 kV
Connection data	Connection technology Connection name: AxiolineÃF connector Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm AxiolineÃF connector Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the Ã¢Ã¢¬ÃAxiolineÃF: system and installationÃ¢Ã¢¬ user manual. Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000Ãm above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Mounting	Mounting type: DIN rail mounting Mounting position: any (no temperature derating) Nominal mounting position: wall mounting on horizontal DIN rail