Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata
Accedi al B2B
Accedi al tuo account

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account
Paese|
||Carrello
Technology BSA logo
Logo Rockwell Automation partner - Value Add Distributor
PHOENIX CONTACT 1821025
PHOENIX CONTACT 1821025
PHOENIX CONTACTNon disponibile

SAMPLE PTSM 0,5/ 5-2,5-V SMDWH - PCB terminal block

PCB terminal block, nominal current: 6 A, rated voltage (III/2): 160 V, nominal cross section: 0.5 mm2, number of potentials: 5, number of rows: 1, number of positions per row: 5, product range: PTSM 0,5/..-V-SMD WH, pitch: 2.5 mm, connection method: Push-in spring connection, mounting: SMD soldering, conductor/PCB connection direction: 90°, color: signal white, Pin layout: Linear pad geometry, Solder pin [P]: 2 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. SAMPLE set with 5 items in belt section. When used as part of soldering process, please use items without SAMPLE marking
Cod. Articolo: 1821025
Cod. Fornitore: 1821025
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Product propertiesProduct line: COMBICON Terminals XS
Product type: Printed circuit board terminal
Product family: PTSM 0,5/..-V-SMD WH
Number of positions: 5
Pitch: 2.5 mm
Number of connections: 5
Number of rows: 1
Number of potentials: 5
Pin layout: Linear pad geometry
Solder pins per potential: 1
Electrical propertiesNominal current IN: 6 A
Nominal voltage UN: 160 V
Degree of pollution: 3
Rated voltage (III/3): 63 V
Rated surge voltage (III/3): 2.5 kV
Rated voltage (III/2): 160 V
Rated surge voltage (III/2): 2.5 kV
Rated voltage (II/2): 320 V
Rated surge voltage (II/2): 2.5 kV
Connection dataConnection technology
Nominal cross section: 0.5 mm²
Conductor connection
Connection method: Push-in spring connection
Conductor cross section rigid: 0.14 mm² ... 0.5 mm²
Conductor cross section flexible: 0.2 mm² ... 0.5 mm² (up to 0.75mm² supported, with a stripping length of 7.5mm and a rated insulation voltage of 32V at III/2)
Conductor cross section AWG: 26 ... 20
Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 0.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 0.34 mm² (possible from 0.14mm², when using ferrule AI0.14-6GY in combination with crimping pliers CRIMPFOX 10T-F)
Cylindrical gauge a x b / diameter: - / 1.2mm
Stripping length: 6 mm
MountingMounting type: SMD soldering
Pin layout: Linear pad geometry
Connection method: Push-in spring connection
Processing notes
Process: Reflow soldering
Moisture Sensitive Level: MSL 1
Classification temperature Tc: 260°C
Solder cycles in the reflow: 3
Material specificationsMaterial data - contact
Note: WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material: Cu alloy
Surface characteristics: hot-dip tin-plated
Metal surface terminal point (top layer): Tin (4 - 8 µm Sn)
Metal surface soldering area (top layer): Tin (4 - 8 µm Sn)
Material data - housing
Color (Housing): signal white (9003)
Insulating material: PA GF
Insulating material group: I
CTI according to IEC 60112: 600
Flammability rating according to UL 94: V0
NotesNote on application: Pick and place pads may protrude beyond the components. The PCB layout must ensure that collisions are avoided when components are assembled.
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/158b0afe23d1ab408f646eacfe25f655/-S204x204-FJPG
Pitch: 2.5 mm
Width [w]: 17.6 mm
Height [h]: 9 mm
Length [l]: 7 mm
Installed height: 9 mm
Solder pin length [P]: 2 mm
PCB design
Pad geometry: 1.4 x 3.4 mm
Pin spacing: 2.5 mm
Mechanical testsConnection test
Specification: IEC 60998-2-2:2002-12
Result: Test passed
Test for conductor damage and slackening
Specification: IEC 60998-2-2:2002-12
Result: Test passed
Pull-out test
Specification: IEC 60998-2-2:2002-12
Conductor cross section/conductor type/tractive force setpoint/actual value: 0.14 mm² / solid / > 10 N
0.2 mm² / flexible / > 10 N
0.5 mm² / solid / > 20 N
0.75 mm² / flexible / > 30 N
Flexion test
Specification: IEC 60998-2-2:2002-12
Result: Test passed
Insulation holder for crimp connections
Result: Test passed
Electrical testsTemperature-rise test
Specification: IEC 60998-2-1:2002-12
Requirement temperature-rise test: Increase in temperature ≤45K
Insulation resistance
Specification: IEC 60998-1:2002-12
Insulation resistance, neighboring positions: >5MΩ
Air clearances and creepage distances |
Specification: IEC 60664-1:2007-04
Insulating material group: I
Comparative tracking index (IEC 60112): CTI 600
Rated insulation voltage (III/3): 63 V
Rated surge voltage (III/3): 2.5 kV
minimum clearance value - non-homogenous field (III/3): 1.5 mm
minimum creepage distance (III/3): 1.6 mm
Rated insulation voltage (III/2): 160 V
Rated surge voltage (III/2): 2.5 kV
minimum clearance value - non-homogenous field (III/2): 1.5 mm
minimum creepage distance (III/2): 1.5 mm
Rated insulation voltage (II/2): 320 V
Rated surge voltage (II/2): 2.5 kV
minimum clearance value - non-homogenous field (II/2): 1.5 mm
minimum creepage distance (II/2): 1.6 mm
Environmental and real-life conditionsVibration test
Specification: IEC 60068-2-6:2007-12
Frequency: 10 - 150 - 10 Hz
Sweep speed: 1octave/min
5g (60.1Hz...150Hz)
Amplitude: 0.35mm (10Hz...60.1Hz)
Test duration per axis: 2.5 h
Glow-wire test
Specification: IEC 60998-1:2002-12
Temperature: 850°C
Time of exposure: 5 s
Ambient conditions
Ambient temperature (operation): -40°C ... 100°C (Depending on the current carrying capacity/derating curve)
Ambient temperature (storage/transport): -40°C ... 70°C
Relative humidity (storage/transport): 30 % ... 70 %
Ambient temperature (assembly): -5°C ... 100°C
Packaging specificationsType of packaging: packed in cardboard

Altri prodotti correlati

Di seguito alcuni articoli correlati a quello che stai vedendo

PHOENIX CONTACT 1891069
FK-MPT 0,5/ 2-3,5 - PCB terminal block
Cod. Articolo: 1891069
PCB terminal block, nominal current: 4 A, rated voltage (III/2): 250 V, nominal cross section: 0.5 mm2, number of potentials: 2, number of rows: 1, number of positions per row: 2, product range: FK-MPT 0,5/..-V, pitch: 3.5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 90°, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard
Scopri di più →
PHOENIX CONTACT 1725656
MPT 0,5/ 2-2,54 - PCB terminal block
Cod. Articolo: 1725656
PCB terminal block, nominal current: 6 A, rated voltage (III/2): 160 V, nominal cross section: 0.5 mm2, number of potentials: 2, number of rows: 1, number of positions per row: 2, product range: MPT 0,5, pitch: 2.54 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0°, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard
Scopri di più →
PHOENIX CONTACT 1995800
PTSA 0,5/ 2-2,5-F OG - PCB terminal block
Cod. Articolo: 1995800
PCB terminal block, nominal current: 2 A, rated voltage (III/2): 250 V, nominal cross section: 0.5 mm2, number of potentials: 2, number of rows: 1, number of positions per row: 2, product range: PTSA 0,5, pitch: 2.5 mm, connection method: Push-in spring connection, mounting: Wave soldering, conductor/PCB connection direction: 45°, color: orange, Pin layout: Linear pinning, Solder pin [P]: 3.6 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. Soldering legs in front area, one-rowed
Scopri di più →