Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata
Accedi al B2B
Accedi al tuo account

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account
Paese|
||Carrello
Technology BSA logo
Logo Rockwell Automation partner - Value Add Distributor
PHOENIX CONTACT 1705716
PHOENIX CONTACT 1705716
PHOENIX CONTACTNon disponibile

PV-FT-CF-C-2,5-450-BK-SP - Device connector front mounting

Device connector front mounting, Range of articles: Sunclix, housing material: PPE, color: black, number of positions: 1, min. conductor cross section: 2.5 mm2, rated voltage: 1000 V DC, rated current: 27 A, Connection method: Crimp, Contact connection type: Socket, cable length: 450
Cod. Articolo: 1705716
Cod. Fornitore: 1705716
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Download
Caratteristiche Tecniche
NotesSafety note
Safety note: • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Product propertiesProduct type: Panel feed-through
Product family: Sunclix
Number of positions: 1
Insulation characteristics
Protection class: II
Degree of pollution: 2
Connection dataConductor connection
Tightening torque: 1.8 Nm ±0.1Nm
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/05af3ee5180b754580e3553125f36976/-S204x204-FJPG
Width: 18.6 mm
Height: 18.6 mm
Length: 43.2 mm
Electrical propertiesRated voltage (III/2): 1000 V
Nominal voltage ATD: 1000 V DC in accordance with IEC 62852:2014/AMD1:2020
Rated surge voltage (III/2): 12 kV
Rated current (2.5 mm²): 27 A (in accordance with IEC 62852:2014/AMD1:2020)
Contact resistance: 0.45 mΩ
≤ 0.45 mΩ (when plugged in (without cable))
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: 100
Insertion force: 45 N ±10N
Withdrawal force: 250 N ±50N
Material specificationsColor: black
Color of the housing part: black
Material: PPE
Flammability rating according to UL 94: V0
Insulating material group: III
Seal material: EPDM
Insulating material: mPPE
Contact surface: Silver Ag
Cable seal material: Elastosil LR 3065/50
Contact material: Cu
Contact surface material: Ag
Contact carrier material: PPE
O-ring material: Silopren LSR 2660
Housing material: PPE
Outer sheath, material: PE-X
Cable/lineCable length: 450 mm
Cable type: Stranded hook-up wire
Hose line
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: 50x0.25
Cable structure: 50 x 0.25mm Ø litz wires, tin-plated, 1x bunched
External cable diameter: 4.25 mm ±0.15mm
4.25 mm 4.1 mm 4.4 mm ±0.15mm
Outer sheath, material: PE-X
External sheath, color: black
Single wire, material: Cu
Single wire, cross section: 2.5 mm²
Cable cross section: 2.5 mm²
Smallest bending radius, fixed installation: 21.25 mm (5x Ø)
Smallest bending radius, movable installation: 42.5 mm (10x Ø)
Cable pull-out force: > 80 N
Halogen-free: Yes, in accordance with DINVDE0472Part815
Yes, in accordance with DINEN50267-2-1
Resistance to oil: no
Flame resistance: no
MountingConnection method: Crimp
Environmental and real-life conditionsAmbient conditions
Degree of protection (when plugged in): IP66 /IP68 (2 m / 24 h)
Degree of protection (not plugged in): IP20
Degree of protection: IP66 / IP68 (2 m / 24 h)
Ambient temperature (operation): -40°C ... 85°C
Ambient temperature (assembly): -25°C ... 50°C
Resistance to oil: no
Standards and regulationsFlame resistance: no
Resistance to oil: no
Standards/specifications: IEC 62852:2014/AMD1:2020
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Manufacturer_declaration_03355.pdf

Manufacturer_declaration_03356.pdf

Manufacturer_declaration_05484.pdf

Package_slip_02037.pdf

Technical_drawing_19572.pdf

Technical_drawing_19573.pdf