Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1423414
PHOENIX CONTACTNon disponibile

SACCCIM12FSL4FEL180THRSHSAMPLE - Sample set

Sample set, Power, 5-position, Socket, straight, coding: L, PCB mounting, THR solder connection
Cod. Articolo: 1423414
Cod. Fornitore: 1423414
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Download
Caratteristiche Tecniche
NotesNotes on operation: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product propertiesProduct type: Contact insert
Application: Power
Sensor type: Power
Number of positions: 5
Coding: L
Data management status
Article revision: 05
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 1.5 kV
Nominal voltage UN: 63 V
Nominal current IN: 14 A
Connection dataConnection method: THR solder connection
InterfacesSignal type/category: Power
Material specificationsFlammability rating according to UL 94: V0
Seal material: FKM
Contact material: CuZn
Contact surface material: Au
Contact carrier material: PA 4T
ConnectorConnection 1
Head design: Socket
Head cable outlet: straight
Coding: L
Cable/lineSignal type/category: Power
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: > 100
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (correctly plugged in and locked)
IP67, when plugged in
Ambient temperature (operation): -25 °C ... 105 °C
-40 °C ... 105 °C (without mechanical actuation)
Standards and regulationsM12
Standard designation: M12 connector
Standards/specifications: IEC 61076-2-111
Note: In line with
MountingMounting type: PCB mounting
Packaging specificationsDelivery state: with assembly pad