Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 1238707
PHOENIX CONTACT 1238707
PHOENIX CONTACTNon disponibile

SACC-DSI-FSX-8CON-PG9-L180 SCOX - Device connector rear mounting

Device connector rear mounting, Ethernet CAT6A, 8-position, Socket, straight-SPEEDCON, coding: X, Rear mounting, M12 x 1, Solder pins, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %)
Cod. Articolo: 1238707
Cod. Fornitore: 1238707
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Descrizione
Download
Caratteristiche Tecniche
NotesNotes on operation: The electrical and mechanical data specified assumes that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of pollution, the connector must be sealed using a protective cap >IP54. Influences arising from litz wires, cables, or PCB mounting must also be taken into consideration. Additional mechanical fixing of the PCB is required.
Order information:: Lock nut is included in the scope of delivery
MountingMounting type: Rear mounting M12 x 1
Product propertiesProduct type: Circular connectors (device side)
Application: Data
Sensor type: Ethernet
Number of positions: 8
Shielded: yes
Coding: X
Thread type: M12
Data management status
Article revision: 03
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
DimensionsLength of the solder pin: 6 mm
Material specificationsMaterial: Zinc die-cast (nickel-plated)
Flammability rating according to UL 94: V0
Seal material: FKM
Material of grip body: Zinc die-cast, nickel-plated
Contact material: CuZn
Contact surface material: gold-plated
Contact carrier material: PPA
Material for screw connection: Zinc die-cast, nickel-plated
Electrical propertiesRated surge voltage: 0.8 kV
Contact resistance: ≤ 3 mΩ
Insulation resistance: > 100 MΩ
Nominal voltage UN: 50 V AC
60 V DC
Nominal current IN: 0.5 A (Data)
Transmission characteristics (category): CAT6A
Connection dataConductor connection
Connection method: Solder pins
Contact connection type: Socket
Tightening torque: 2 Nm ... 3 Nm
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 100
ConnectorConnection 1
Head design: Socket
Head cable outlet: straight
Head locking type: SPEEDCON
Coding: X
Cable/lineSignal type/category: Ethernet CAT6A
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (When plugged in)
IP67
Ambient temperature (operation): -40 °C ... 85 °C
Standards and regulationsM12
Standard designation: M12 connector
Shock, vibration
Standards/specifications: IEC 61076-2-109
EN 50155
Descrizione
SACC-DSI-FSX-8CON-PG9-L180 SCOX Connettore
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Design-In_00019.pdf

Technical_drawing_10618.pdf