Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata
Accedi al B2B
Accedi al tuo account

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account
Paese|
||Carrello
Technology BSA logo
Logo Rockwell Automation partner - Value Add Distributor
PHOENIX CONTACT 1205130
PHOENIX CONTACT 1205130
PHOENIX CONTACTNon disponibile

HSCP-SP 2,5-1U00-7016 - Filler plug

PCB connector, nominal cross section: 2.5 mm2, color: anthracite gray, nominal current: 8 A, rated voltage (III/2): 300 V, number of potentials: 0, number of rows: 2, number of positions: 0, number of connections: 0, product range: HSCP-SP 2,5-.., pitch: 5 mm, number of solder pins per potential: 0, locking clip: - Locking clip, plug-in system: HSC 2,5, locking: without, mounting: without, Filler plugs
Cod. Articolo: 1205130
Cod. Fornitore: 1205130
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Product propertiesProduct type: PCB connector
Product family: HSCP-SP 2,5-..
Number of positions: 0
Pitch: 5 mm
Number of connections: 0
Number of rows: 2
Number of potentials: 0
Solder pins per potential: 0
Electrical propertiesNominal current IN: 8 A
Nominal voltage UN: 300 V
Degree of pollution: 3
Rated voltage (III/3): 250 V
Rated surge voltage (III/3): 4 kV
Rated voltage (III/2): 300 V
Rated surge voltage (III/2): 4 kV
Rated voltage (II/2): 600 V
Rated surge voltage (II/2): 4 kV
Connection dataConnection technology
Connector system: HSC 2,5
Nominal cross section: 2.5 mm²
Interlock
Locking type: without
Mounting flange: without
Conductor connection
Conductor cross section rigid: 0.2 mm² ... 1.5 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm²
Cylindrical gauge a x b / diameter: 2.4mmx1.5mm / 1.9mm
Stripping length: 10 mm
Material specificationsMaterial data - housing
Color (Housing): anthracite grey (7016)
Insulating material: PA
Insulating material group: I
CTI according to IEC 60112: 600
Flammability rating according to UL 94: V0
Glow wire flammability index GWFI according to EN60695-2-12: 850
Glow wire ignition temperature GWIT according to EN60695-2-13: 775
Temperature for the ball pressure test according to EN60695-10-2: 125°C
DimensionsPitch: 5 mm
Width [w]: 18.8 mm
Height [h]: 10.9 mm
Length [l]: 21.6 mm
MountingProcessing notes
Moisture Sensitive Level: MSL 1
Classification temperature Tc: 260°C
Solder cycles in the reflow: 3
NotesAssembly instruction:: Refer to the data sheet for the range in the download area.
Environmental and real-life conditionsAmbient conditions
Ambient temperature (operation): -40°C ... 105°C (dependent on the derating curve)
Ambient temperature (storage/transport): -40°C ... 55°C
Relative humidity (storage/transport): 30 % ... 70 %
Ambient temperature (assembly): -5°C ... 100°C
Electrical testsAir clearances and creepage distances |
Specification: IEC 60664-1:2007-04
Insulating material group: I
Comparative tracking index (IEC 60112): CTI 600
Rated insulation voltage (III/3): 250 V
Rated surge voltage (III/3): 4 kV
minimum clearance value - non-homogenous field (III/3): 3 mm
minimum creepage distance (III/3): 3.2 mm
Rated insulation voltage (III/2): 300 V
Rated surge voltage (III/2): 4 kV
minimum clearance value - non-homogenous field (III/2): 3 mm
minimum creepage distance (III/2): 3 mm
Rated insulation voltage (II/2): 600 V
Rated surge voltage (II/2): 4 kV
minimum clearance value - non-homogenous field (II/2): 3 mm
minimum creepage distance (II/2): 3.2 mm