Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata
Accedi al B2B
Accedi al tuo account

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account
Paese|
||Carrello
Technology BSA logo
Logo Rockwell Automation partner - Value Add Distributor
PHOENIX CONTACT 1161208
PHOENIX CONTACTNon disponibile

Printed-circuit board connector - MVSTBR 2,5/ 3-STF-5,08 BUBDWH - 1161208

Printed-circuit board connector - MVSTBR 2,5/ 3-STF-5,08 BUBDWH - 1161208
Cod. Articolo: 1161208
Cod. Fornitore: 1161208
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Caratteristiche Tecniche
Features
Well-known connection principle allows worldwide use
Screwable flange for superior mechanical stability
Low temperature rise, thanks to maximum contact force
Allows connection of two conductors
Approvals
VDE Zeichengenehmigung
EAC
IECEE CB Scheme
CSA
cULus Recognized
Specifiche
Environmental and durability tests (E)
Specification:IEC 61984:2008-10
Result, degree of protection, IP code:Finger safety with IP20 test finger
Ambient conditions
Ambient temperature (storage/transport):-40 °C - 70 °C
Ambient temperature (assembly):-5 °C - 100 °C
Ambient temperature (operation):-40 °C - 100 °C (dependent on the derating curve)
Connection capacity
Connection method:Screw connection with tension sleeve
pluggable:Yes
Conductor cross section solid:0.2 mm² - 2.5 mm²
Conductor cross section flexible:0.2 mm² - 2.5 mm²
Conductor cross section AWG / kcmil:24 - 12
Conductor cross section flexible, with ferrule without plastic sleeve:0.25 mm² - 2.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve:0.25 mm² - 2.5 mm²
2 conductors with same cross section, solid:0.2 mm² - 1 mm²
2 conductors with same cross section, flexible:0.2 mm² - 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve:0.25 mm² - 1 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve:0.5 mm² - 1.5 mm²
Cylindrical gauge a x b / diameter:2.8 mm x 2.0 mm / 2.4 mm
Stripping length:7 mm
Torque:0.5 Nm - 0.6 Nm
Item properties
Brief article description:Printed-circuit board connector
Plug-in system:CLASSIC COMBICON
Type of contact:Female connector
Range of articles:MVSTBR 2,5/..-STF
Pitch:5.08 mm
Number of positions:3
Connection method:Screw connection with tension sleeve
Drive form screw head:Slotted (L)
Number of levels:1
Flange specifications
Type of locking:Screw locking
Mounting flange:Screw flange
Torque:0.3 Nm
Termination and connection method
Test for conductor damage and slackening:IEC 60999-1:1999-11
Test for conductor damage and slackening:Test passed
Electrical parameters
Nominal current:12 A
Nom. voltage:320 V
Rated voltage:250 V
Rated voltage (III/2):320 V
Rated voltage (II/2):630 V
Rated surge voltage (III/3):4 kV
Rated surge voltage (III/2):4 kV
Rated surge voltage (II/2):4 kV
Dimensions for the product
Length [ l ]:12.6 mm
Width [ w ]:25.4 mm
Height [ h ]:26 mm
Pitch:5.08 mm
Height (without solder pin):26 mm
Pull-out test
Pull-out test:IEC 60999-1:1999-11
Pull-out test:Test passed
Conductor cross section / conductor type / tensile force:0.2 mm² / solid / > 10 N
Conductor cross section / conductor type / tensile force:0.2 mm² / flexible / > 10 N
Conductor cross section / conductor type / tensile force:2.5 mm² / solid / > 50 N
Conductor cross section / conductor type / tensile force:2.5 mm² / flexible / > 50 N
Packaging information
Type of packaging:packed in cardboard
Pieces per package:50
Denomination packing units:Pcs.
Climatic tests (D)
Specification:ISO 6988:1985-02
Cold stress:-40 °C/2 h
Thermal stress:100 °C/168 h
Corrosive stress:0.2 dm³ SO₂ on 300 dm³/40 °C/1 cycle
Impulse withstand voltage at sea level:4.8 kV
Power-frequency withstand voltage:2.21 kV
Material data - contact
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material:Cu alloy
Surface characteristics:hot-dip tin-plated
Metal surface terminal point (top layer):Tin (4 - 8 µm Sn)
Metal surface contact area (top layer):Tin (4 - 8 µm Sn)
Material data - housing
Housing color:blue (5015)
Insulating material:PA
Insulating material group:I
CTI according to IEC 60112:600
Flammability rating according to UL 94:V0
Mechanical tests (A)
Test specification:IEC 61984
Insertion strength per pos. approx.:8 N
Withdraw strength per pos. approx.:6 N
Polarization when inserted requirement >20 N:Test passed
Contact holder in insert requirements >20 N:Test passed
Durability tests (B)
Specification:IEC 60512-9-1:2010-03
Contact resistance R1:2.4 mΩ
Insertion/withdrawal cycles:25
Contact resistance R2:2.4 mΩ
Impulse withstand voltage at sea level:4.8 kV
Power-frequency withstand voltage:2.21 kV
Insulation resistance, neighboring positions:> 75 TΩ
Environmental Product Compliance
REACh SVHC:Lead 7439-92-1
Current carrying capacity / derating curves
Specification:IEC 61984
Air clearances and creepage distances
Clearances and creepage distances:IEC 60664-1:2007-04
Specification:IEC 60664-1:2007-04
Minimum clearance - inhomogeneous field (III/3):3 mm
Minimum clearance - inhomogeneous field (III/2):3 mm
Minimum clearance - inhomogeneous field (II/2):3 mm
Minimum creepage distance value (III/3):3.2 mm
Minimum creepage distance value (III/2):3 mm
Minimum creepage distance value (II/2):3.2 mm