1105134 PHOENIX CONTACT - Technology Bsa

Product properties	Product type: Coupling relay Application: Extension module Insulation characteristics Protection class: III (ENÃ50178) Times Response time: see user manual Restart time: min. 5 s (Boot time) max. 10 s (Boot time)
Electrical properties	Maximum power dissipation for nominal condition: 3.5 W (with max. permissible load) Nominal operating mode: 100% operating factor Interfaces: DIN rail TBUS for connection to the master module, supplied as standard Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VÃAC Rated surge voltage/insulation: Basic insulation 4 kV between all current paths and housing Supply Designation: A1/A2 Rated control circuit supply voltage U_S: 19.2 VÃDC ... 28.8 VÃDC 24 VÃDC -20Ã%Ã/Ã+20Ã% (provide external protection, typically 5ÃA) Rated control supply current I_S: typ. 30 mA Power consumption at U_S: typ. 0.72 W Inrush current: 2 A (ÃÃ¢tÃ=Ã1Ãms at U_s) Filter time: typ. 5 ms (at A1 in the event of voltage dips at U_s) Protective circuit: Serial protection against polarity reversal Suppressor diode SupplyÃ¢Ã¢¬Ã¢¹ Designation: 24V/A2 Rated control circuit supply voltage U_S: 24 VÃDC -20Ã%Ã/Ã+20Ã% (provide external protection, typically 5ÃA) Rated control supply current I_S: typ. 20 mA (Outputs active, without load) Inrush current: 10 A (at both terminal pointsÃ5ÃandÃ6,ÃÃÃ¢tÃ=Ã1Ãms at U_s) Filter time: typ. 1 ms (in the event of voltage dips) Protective circuit: Suppressor diode
Output data	Signal: MO1Ã...ÃMO16 Output description: PNP, IEC 61131-2 Typ 0,1 non-safety-related Reference ground A2 Number of outputs: 16 Output voltage when switched off: max. 0.1 V Voltage: 24 VÃDC (via 24 V) Maximum inrush current: 1.1 A (ÃÃ¢tÃ=Ã3ÃsÃat U_s) Limiting continuous current: 100 mA (per channel) 1.6 A (Total current of all digital signal outputs) Leakage current: max. 100 ÃµA Switching frequency: max. 1/4ÃxÃt_Cycle [Hz] Protective circuit: Suppressor diode Short-circuit protection: Yes (self-limitation at 1.1ÃA) Cable length: max. 100 m (per output)
Connection data	Connection technology pluggable: yes Conductor connection Connection method: Screw connection Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross-section AWG: 24 ... 12 Stripping length: 7 mm Screw thread: M3 Tightening torque: 0.5 Nm ... 0.6 Nm
Signaling	Status display: 1 x LED (green), 2 x LED (orange) 16 x LED (yellow) Operating voltage display: 1 x green LED Error indication: 2ÃxÃLED (red)
Dimensions	Width: 22.61 mm Height: 112.58 mm Depth: 113.6 mm
Material specifications	Housing material: Polyamide PA non-reinforced
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -10°C ... 55°C (observe derating) Ambient temperature (storage/transport): -20°C ... 85°C Maximum altitude: Ã¢Ã¢°¤ 2000 m (Above sea level) Max. permissible humidity (storage/transport): 95 % (non-condensing) Max. permissible relative humidity (operation): 95 % (non-condensing) Shock: 10g for ÃÃ¢tÃ=Ã16Ãms (continuous shock, 1000 shocks in each space direction) Vibration (operation): 10ÃHzÃ...Ã150ÃHz, 2g
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: ENÃ50178
Mounting	Mounting type: DIN rail mounting Assembly instructions: Observe derating Mounting position: vertical or horizontal Connection method: Screw connection