Non disponibile 
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/9e6e964f367bbe4db818e0ffaa606273/-S204x204-FJPG Width: 14.9 mm Height: 62.2 mm Depth: 62 mm |
| Notes | Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
| Interfaces | SmartElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartElement. Start time until ready to operate: < 500 ms |
| System properties | Module ID code (hex): none Process data channel: 48 bit Input address area: 6 Byte Output address area: 6 Byte Required parameter data: 20 Byte Required configuration data: 7 Byte |
| Input data | Counter Input name: Counter input Description of the input: EN 61131-2 type 1 Connection method: Push-in connection Number of inputs: 1 (Source) Input voltage: 24 VDC Input voltage range "0" signal: -3 VDC ... 5 VDC Input voltage range "1" signal: 15 VDC ... 30 VDC Input frequency: max. 150 kHz Input current: typ. 2.3 mA Resolution: 32 bits |
| Output data | Digital Output name: Digital output Output description: Push-pull output (switches to GND at level 0) Connection method: Push-in connection Number of outputs: 1 (OUT) Protective circuit: Short-circuit and overload protection; electronic Surge protection; Suppressor diode Output voltage: 24 VDC |
| Product properties | Type: modular Product type: I/O component Product family: Axioline SmartElements Mounting position: See the system in which the SmartElement is used. Insulation characteristics Overvoltage category: II (IEC 60664-1, EN60664-1) Pollution degree: 2 (IEC 60664-1, EN60664-1) |
| Electrical properties | Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Potentials: I/O supply (U Supply voltage: 24 VDC (using card edge connectors) Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 700 mA typ. 620 mA Current consumption: min. 20 mA (without connected peripherals) Power consumption: max. 21 W (of which 1.48W internal losses) min. 480 mW Protective circuit: Surge protection; See the system in which the SmartElement is used. Reverse polarity protection; Polarity protection diode Supply: Designation: Sensor/actuator supply US Supply voltage: 24 VDC Electrical isolation/isolation of the voltage ranges Test voltage: Communications supply / 24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: Communications supply / functional ground: 500 VAC, 50 Hz, 1 min. Test voltage: 24V supply (I/O) / functional ground: 500 VAC, 50 Hz, 1 min. |
| Connection data | Connection technology Connection name: I/O Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineSmartElementsâ user manual. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.25 mm² ... 1.5 mm² Conductor cross section flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm I/O Connection method: Push-in connection Note on the connection method: Please observe the information provided on conductor cross sections in the âAxiolineSmartElementsâ user manual. Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Air pressure (operation): 70 kPa ... 106 kPa (up to 3000m above sea level) Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000m above sea level) Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing) |
| Standards and regulations | Protection class: III (IEC 61140, EN61140, VDE0140-1) |
| Mounting | Mounting type: Smart Element slot Mounting position: See the system in which the SmartElement is used. |
Di seguito alcuni articoli correlati a quello che stai vedendo
