1079231 PHOENIX CONTACT - Technology Bsa

AXL SE PSDO4/2 2A - Safety module

Axioline SmartElements, Digital output module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Safe digital outputs:2 (2-channel assignment), 4 (1-channel assignment), 24 VDC, 2 A, connection technology:2-conductor, degree of protection: IP20

Cod. Articolo: 1079231 Copia - Copy

Cod. Fornitore: 1079231 Copia - Copy

PHOENIX CONTACT

Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/9e6e964f367bbe4db818e0ffaa606273/-S204x204-FJPG Width: 14.9 mm Height: 62.2 mm Depth: 62 mm
Interfaces	SmartÃElement interface Number of interfaces: 1 Connection method: Card edge connector Transmission speed: See system in which you use the SmartÃElement.
System properties	Module Input address area: 5 Byte (PROFIsafeÃ2.6.1) Output address area: 6 Byte (PROFIsafeÃ2.6.1) Required configuration data: 5 Byte
Output data	Digital Output name: Safe digital outputs Output description: ENÃ61131-2 Connection method: Push-in connection Connection technology: 2-conductor Number of outputs: 2 (2-channel assignment) 4 (1-channel assignment) Protective circuit: Short-circuit protection, overload protection of the outputs; electronic Output voltage: 24 VÃDC Output current: max. 2 A (per output) Maximum output current per channel: 2 A Maximum output current per module: 4 A Nominal output voltage: 24 VÃDC Load min.: 1.5 kÃ© (at nominal voltage) Output voltage when switched off: < 5 V Output current when switched off: < 2 mA Nominal load, inductive: 48 VA (1ÃH; 12ÃÃ©; at nominal voltage) Nominal load, ohmic: 48 W (12ÃÃ©, at nominal voltage) Switching frequency: 1 Hz (0.2ÃHz at >Ã1ÃA) Reverse voltage resistance to short pulses: no Behavior with overload: Switch-off of the relevant output, restart upon acknowledgment Behavior with inductive overload: Output can be destroyed
Product properties	Type: modular Product type: I/O component Product family: Axioline SmartÃElements Mounting position: any Application: Functional safety PROFIsafe only for connection to Phoenix Contact or Siemens controller Operating mode: PROFIsafe 2.4, PROFIsafe 2.6.1 Insulation characteristics Overvoltage category: II (IEC 60664-1) Pollution degree: 2 (ENÃ60664-1)
Electrical properties	Transmission medium: Copper Potentials Protection: external fusing via the system in which the SmartÃElement is used Protective circuit: Surge protection of the supply voltage; electronic (35 V, 0.5 s) Polarity reversal protection of the supply voltage; via the system in which the SmartÃElement is used Potentials: AxiolineÃF local bus supply (U Supply voltage: 5 VÃDC (via bus base module) Current draw: max. 120 mA (at U_Bus 5ÃVÃDC) typ. 93 mA (at U_Bus 5ÃVÃDC) Potentials: Communications power supply of the Smart Elements (U Supply voltage: using card edge connectors Potentials: I/O supply (U Supply voltage: 24 VÃDC (using card edge connectors) Supply voltage range: 19.2 VÃDC ... 30 VÃDC (including all tolerances, including ripple) Current draw: max. 30 mA ((Supply from U_Pwith 30ÃVÃDC, all outputs set, without supply to the actuators)) typ. 25 mA ((Supply from U_Pwith 24ÃVÃDC, all outputs set, without supply to the actuators)) Current consumption: min. 21 mA ((Supply from U_Pwith 19.2ÃVÃDC, all outputs set, without supply to the actuators)) Power consumption: max. 900 mW min. 403 mW
Connection data	Connection technology Connection name: I/O Note on the connection method: Note the specification in the section Conductor cross sections, and stripping and insertion lengths. Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.25 mm² ... 1.5 mm² Conductor cross section flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm I/O Connection method: Push-in connection Note on the connection method: Note the specification in the section Conductor cross sections, and stripping and insertion lengths. Conductor cross section, rigid: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible: 0.25 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Stripping length: 8 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -25°C ... 60°C Degree of protection: IP20 Degree of protection at installation location: min. IP54 Air pressure (operation): 70 kPa ... 108 kPa Air pressure (storage/transport): 66 kPa ... 108 kPa Ambient temperature (storage/transport): -40°C ... 85°C Permissible humidity (operation): 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 5 % ... 95 % (non-condensing)
Standards and regulations	Protection class: III (IEC 61140, ENÃ61140, VDEÃ0140-1) Air clearances and creepage distances Air clearances and creepage distances: IEC 60664-1
Mounting	Mounting type: Smart Element slot Mounting position: any