Catalogo Prodotti - Technology Bsa

800F Non-Illuminated Mushroom Operators, Twist to Release, 40mm, Round Plastic (Type 4/4X/13, IP66), Red, , Plastic Latch Mount, 0 N.O. Contact(s), 1 N.C. Contact(s), Self Monitoring, Standard Pack (Qty. 1)

800F Non-Illuminated Mushroom Operators, Twist to Release, 40mm, Round Plastic (Type 4/4X/13, IP66), Red, , Plastic Latch Mount, 0 N.O. Contact(s), 1 N.C. Contact(s), Standard, Standard Pack (Qty. 1)

Distribution block, Basic terminal block, nom. voltage: 450 V, nominal current: 17.5 A, number of connections: 18, connection method: Push-in connection, cross section: 0.14 mm²-2.5 mm², mounting type: for snapping onto a DIN rail adapter, Direct mounting with flange, Free-hanging, color: gray

1492 Terminal Block Accessories Electrical Warning Plate6 mm Center to Center , 4 Pole ,

Preassembled relay module with Push-in connection, consisting of: relay base, relay retaining bracket, and power contact relay with test button, integrated status LED, and freewheeling diode. Contact switching type: 1 changeover contact. Input voltage: 24 V DC

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Socket, number of potentials: 2, number of rows: 1, number of positions: 2, number of connections: 2, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0°, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

Slim Line Relay with "PIN Style" Terminations, 700-HP General Purpose PCB PIN Style Relay, 8 A, 2 Pole, DPDT, 24V 50/60Hz, (Pkg. Qty. of 10)

DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material:Steel, galvanized, Standard profile, color:silver

C(D)UK, Free Mount Cylinder, Non-rotating, Double Acting - Bore Size 20 mm, Port Thread Bore 6~25:M5, Bore 32: Rc 1/8, Stroke 20 mm

Plug-in miniature relay, with power contact, 2 changeover contacts, test button, mechanical switch position indicator, polarity: bipolar, input voltage: 24VDC

Slim Line Relay with "PIN Style" Terminations, 700-HP General Purpose PCB PIN Style Relay, 8 A, 2 Pole, DPDT, 240V 50/60Hz, (Pkg. Qty. of 10)

6.2 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V AC/DC

Rail adapters, for M5 screws, width: 10 mm, height: 42.6 mm, color: gray, mounting type: Plug-on assembly

Potential distributors, nom. voltage:250 V, nominal current:17.5 A, connection method:Push-in connection, 1st, 2nd, 3rd and 4th level, Rated cross section:1.5 mm², cross section:0.14 mm²-2.5 mm², mounting:NS 35/7,5,NS35/15, color:gray, color of connection elements:blue

Potential distributors, with option to supply up to 6 mm², nom. voltage:250 V, nominal current:17.5 A, connection method:Push-in connection, Rated cross section:1.5 mm², cross section:0.14 mm²-2.5 mm², Feed-in stage, Rated cross section:4 mm², cross section:0.2 mm²-6 mm², mounting:NS 35/7,5,NS35/15, color:gray, color of connection elements:brown

Frame-J, Terminal Cover, 3p, Qty 2, High

Multi-channel electronic circuit breaker for protecting four loads at 24VDC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.

Sensor/actuator terminal block, nom. voltage: 250 V, nominal current: 18 A, number of connections: 4, connection method: Spring-cage connection, Rated cross section: 2.5 mm², cross section: 0.08 mm²-4 mm², mounting type: NS 35/7,5, NS35/15, color: gray

Spring Clamp Terminal Block,Two-Circuit Block with 1 Feed-Through and 1 Ground Circuit,4 mm (# 22 AWG - # 10 AWG) or 2.5 mm (# 22 AWG - # 12 AWG),Standard Feedthrough,Gray (Standard),

Snap-in markers, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, lettering field size: 49x15mm, Number of individual labels: 18