Catalogo Prodotti - Technology Bsa

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), Cellular communication(4G/2G), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, ISO15118, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), Cellular communication(4G/2G), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, AC charging controller, IEC 61851-1, operating mode:Stand-Alone, Client, interface:CHARXcontrolmodular system bus, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX control modular, the residual current monitoring module is used for AC and DC residual current detection in AC charging points. The higher-level safety equipment (e.g., residual current device) is protected against potential DC residual currents.

CHARX control modular, RFID device, for connection to CHARX control modular AC charging controllers, in housing

CHARX control modular, AC charging controller, with Embedded Linux system, IEC 61851-1, operating mode:Stand-Alone, Client, Server, interface:Ethernet(2x), CHARXcontrolmodular system bus, MICRO-USBtypeC, communication protocol:OCPP1.6J, Modbus/TCP, MQTT, Connectable peripheral devices:Energy meter, RFID, DC residual current detection, DIN rail mounting

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), 32 A / 480 V (AC), Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

Programmable charging controller for DC and AC charging of electric vehicles in accordance with IEC 61851-1,-23, DIN SPEC 70121, and CHAdeMO, with integrated cellular modem

CHARX connect, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), Type2, IEC 62196-2, Front mounting, housing: black, PHOENIXCONTACT logo

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with charging connector holder, with replaceable mating face frame, with straight panel feed-through, with variable-speed fan, with digital temperature sensors, HPC CCS type1, SAEJ1772, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 5 m, black, straight

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with charging connector holder, with replaceable mating face frame, with right-hand angled panel feed-through, with variable-speed fan, with digital temperature sensors, HPC CCS type1, SAEJ1772, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 5 m, black, straight

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with charging connector holder, with replaceable mating face frame, without panel feed-through, with digital temperature sensors, HPC CCS type1, SAEJ1772, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 5 m, black, straight

CHARX connect, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), GB/T, GB/T20234.2, Front mounting, housing: black

CHARX connect standard, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), CCS type2, IEC 62196-3, Front mounting, housing: black, Item is not compatible with the HPC CCS type2 charging cable from Phoenix Contact.

CHARX connect, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), GB/T, GB/T20234.3, Front mounting, Park position with pushbutton (N/C contact) to detect the plug state., housing: black

CHARX connect, Quick coupling, Accessories, Counterpart for connecting the coolant lines of a PHOENIXCONTACT HPC DC charging cable, HPC CCS type2, HPC CCS type1

CHARX connect, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), GB/T, GB/T20234.3, Front mounting, housing: black

CHARX connect professional, HPC DC charging cable, with cooled vehicle charging connector and cooled cable, for charging electric vehicles (EV) with direct current (DC), with charging connector holder, with replaceable mating face frame, with left-hand angled panel feed-through, with variable-speed fan, with digital temperature sensors, HPC CCS type1, SAEJ1772, IEC 62196-3-1, 500 A / 1000 V (DC), PHOENIXCONTACT logo, cable: 5 m, black, straight

CHARX connect, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), GB/T, GB/T20234.3, Front mounting, housing: black

CHARX connect, Charging connector holder, Accessories, for vehicle charging connectors on charging stations (EVSE), HPC CCS type1, SAEJ1772, Front mounting, housing: black