Catalogo Prodotti - Technology Bsa

Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARKE.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snapped, snap into tall marker groove, for terminal block width: 30000 mm, lettering field size: 9.5x50000mm, Number of individual labels: 1

Potential distributors, nom. voltage:250 V, nominal current:17.5 A, connection method:Push-in connection, 1st, 2nd, 3rd and 4th level, Rated cross section:1.5 mm², cross section:0.14 mm²-2.5 mm², mounting:NS 35/7,5,NS35/15, color:gray, color of connection elements:blue

Snap-in markers, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, lettering field size: 49x15mm, Number of individual labels: 18

DeviceNet , Trunk End: Mini, Straight Female, Device End: Mini, Straight Male, Thin Media, Grey PVC,

Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 20x9mm, Number of individual labels: 70

Data connector, Ethernet CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, coding: D, Screw connection, knurl material: Brass, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm

Mounting bracket, BJ2-016

Multi-channel electronic circuit breaker for protecting four loads at 24VDC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails.

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 8.2 mm, lettering field size: 7.6x10.5mm, Number of individual labels: 42

Equipment marking, Aluminum label, aluminum color, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, mounting type: adhesive, lettering field size: 100x60mm, Number of individual labels: 1

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Socket, number of potentials: 2, number of rows: 1, number of positions: 2, number of connections: 2, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0°, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

Photoelectric sensors: GR18

1492-FB Fuse Holder with 3 poles, Class J Type Fuses, 60A, Fuse Block with Indication, 110...600V AC/DC, Pkg. Qty. 2

Red Lens Cap - Square

1492-FB Fuse Holder with 3 poles, Class J Type Fuses, 60A, Fuse Block without Indication, 600V AC/DC, Pkg. Qty. 2

Gateway for connecting a PSR-M base module to a higher-level controller, PROFINET, TBUS interface, plug-in Push-in terminal block, TBUS connector included

140M-C-Afc

IEC Control and Load Switch Actuator, Type A, Gray/Black, 48mm x 48mm, Legend Text: No Text, European Product Offering

Mounting bracket, BJ2-010