Catalogo Prodotti - Technology Bsa

1492 Terminal Block Accessories Electrical Warning Plate8 mm Center to Center , 4 Pole ,

Knife-disconnect terminal block, nom. voltage:400 V, nominal current:20 A, connection method: Push-in connection, Rated cross section:2.5 mm², cross section:0.14 mm²-4 mm², mounting: NS 35/7,5, NS35/15, color:gray

Warning label, Card, yellow/black, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, diameter: 0 mm, lettering field size: 50x50mm, Number of individual labels: 6

Inductive proximity sensors: IME

Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 15x5mm, Number of individual labels: 189

Component terminal block, The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A., with integrated diode, nom. voltage:250 V, nominal current:0.5 A, 1st and 2nd level, connection method: Spring-cage connection, Rated cross section:2.5 mm², cross section:0.08 mm²-4 mm², mounting: NS 35/7,5, NS35/15, color:gray

MCS 100-C, 104-C, 700-CF, 700S-CF Accessories, Dovetail Connector, Dual, 9mm Spacing (Pkg. Qty. 10)

Dedicated Power Feed, 50mm², used with 1,2 and 3 pole fuse blocks

Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 6.2 mm, lettering field size: 6.15x10.5mm, Number of individual labels: 10

Caps, Lens and DiffusersFlush/Guraded, Non-IlluminatedBlueMolded Cap, "R"

Device marker, Aluminum label, aluminum color, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type: screw, rivet, lettering field size: 110x80mm, Number of individual labels: 2

1 N.O. / 1 N.C. Snap Action

194E Accessories, Metal Shaft, 52mm (2-3/64 in.), for Base Mnt. Sw., Pkg. Qty. 5

Foot ground PBF

800F Accessories, 800F Diffuser for Pilot Lights, Universal: ATTENTION/DANGER, Pkg. Qty 1, 1 Per Package

Device marker, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: screw, rivet, lettering field size: 75.6x54mm, Number of individual labels: 2

Device connector, rear mounting, 3-position, Socket, straight, M8, Rear mounting, M10, Solder pins