Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 104S-C09EJ210BC
ROCKWELL AUTOMATIONAvailable

SC Safety Contactor, 9 A, 24V50/60Hz/24VDC Elec Cl, 1 NO / 5 NC, 24V DC Electronic, Bifuracated Contact, Line Side Connection, No Options Selected

104S-C Safety Reversing Contactors, 9A, Line Side, 24V DC (w/Elec. Coil), 1 N.O. 5 N.C., Bifurcated Contact
Product Code: 104S-C09EJ210BC
Partner cod.: 104S-C09EJ210BC
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Voltage type for actuatingDC
Rated control supply voltage at AC 50 Hz0 V
Rated control supply voltage at AC 60 Hz0 V
Rated control supply voltage at DC24 V
Current (Ie), max9 A
Switching frequency, max250 ops/h
Main current circuit resistance2.7 mOhm
Cross section per UL/CSA16 AWG
Rated operational current for contactor at elevator duty (UL/CSA)7.8 A @ 200V
Rated isolation voltage (Ui)690V @ IEC
Rated voltage (Ue)690V @ AC, 50/60 Hz
Rated operational power for contactor at wye-delta5 Hp @ 230V, 60 Hz
Rated filament current12 A @ 230/240V, AC-5b
Power dissipation0.66 W @ 400V, AC-3, Ie
Coil terminal conductor cross section1...4 mm² @ 2 conductor
Rated current (enclosed)9.8 A @ 115V, 1-phase per UL/CSA
Rated power (enclosed)7.5 Hp @ 575V, 3-phase per UL/CSA
Coil consumption pick-up (avg/peak)14/22 W @ DC (electronic-EA)
General purpose current (enclosed)25 A per UL/CSA
Capacitance, max500 µF @ short-circuit current of 20 kA
Switching of low inductive loads32 A @ 440V, AC-7a per IEC 61095 (50 Hz)
Operating limits, pick-up(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of motor load9 A @ 400V, AC-7b per IEC 61095 (50 Hz)
Short time withstand (Icw)170 A for 10 s, 60 °C
Coil consumption, hold-in9.5VA/2.7 W @ 50 Hz, 60 Hz, 50/60 Hz
Coil consumption, pick-up75VA @ 50 Hz, 60 Hz, 50/60 Hz
Operating time20...50 ms @ DC (electronic) opening delay
Total power dissipationDC control (electronic): 2.4 W @ 400V, AC-3, Ie
Operating limits, dropout(0.3...0.6) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of lampsGas discharge lamps, open: 22.5 A @ 40 °C, AC-5a
Switching of hermetically sealed cooling compressor motors8 A @ 690V, AC-8a (manual reset of overload release (50 Hz))
Coil insulation classClass F per IEC 60085, UL Class 105
Rating for switching AC motors7 1/2 Hp @ 575V, 60 Hz, 3-phase (AC-2, AC-3, AC-4)
BS88 fuses current ratingType 2 (per IEC 60947-4-1): 20 A @ 415V, 65 kA available fault current
UL class K5 and RK5 fuses rating35 A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
UL class CC and CSA HRCI-MISC fuses rating20 A @ 100 kA available fault current per UL 508 and CSA 22.2 No. 14
UL inverse-time circuit breaker30 A @ 600Y/347V, 25 kA available fault current per UL 508 and CSA 22.2 No. 14
Coil voltage24V DC electronic coil
Rated operational current (Ie)9 A @ 415V, AC-4 (50 Hz), ambient temperature 60 °C
Rated operational power (Pe)7.5 kW @ 690V, star-delta starting (50 Hz)
DIN fuses (gG, gL) current ratingType 2 (per IEC 60947-4-1): 25 A @ 690V, 50 kA available fault current
UL class J and CSA HRCI-J fuses rating20 A @ 100 kA available fault current per UL 508 and CSA 22.2 No. 14
Switching of power transformersApparent power: 9.4 kVA @ 500V, AC-6a, 50 Hz (n = 30)
Switching of 3-phase CapacitorsSingle capacitor: 8 kVAR @ 690V, AC-6b, 50 Hz, 60 °C (inductance of leads between capacitors in parallel: minimum 6 µH)
Switching of DC loads3-pole in series: 6 A @ 220V (shunt-wound motors starting, reverse current braking, reversing, stepping DC-3 at 60 °C)
Contacts3 main poles with NC mechanically linked or mirror feedback contacts
FunctionReversing contactor
Rated impulse voltage withstand (Uimp)6 kV
Conventional coil typeYes
Electronic-EI coil typeYes
Rated coil frequencyAC 50/60 Hz, DC
Ripple, max±15% @ DC (electronic)
OFF time, min50 ms @ DC (electronic)
Width98.8 mm
Height80.77 mm
Depth115.62 mm
Auxiliary contact typeBifurcated contact
OptionsNo options selected
Optional accessoriesSide-mount auxiliary contacts, surge suppressors, electronic timers, mechanical interlocks
FeaturesPositively guided/mechanically linked auxiliary contacts, front-mounted auxiliary contacts: permanently fixed, protective cover to prevent manual operation, red contact housing for easy identification, incorporates IEC 947-5-1 “Mechanically Linked” symbol
Recommended torque9 lb.in
Coil terminationLine side connection
Conductor cross sectionMain contact, 2 conductor: 1.5...6 mm²
LifespanMechanical DC control: 13000000 ops
Type of electrical connection of main circuitScrew connection
Auxiliary contacts1 NO/5 NC
Altitude of installation site, max2000 m (NN), per IEC60947-1
Protection against accidental contactFinger-and back-of-hand proof per VDE0106, part 100
Ambient temperatureStorage: -55...80 °C (-67...176 °F)
Protection class, auxiliary contactIP2X
Resistance to vibrationIEC 60068-2-6
Resistance to shockIEC 60068-2-27