Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

ROCKWELL AUTOMATION 100-K05D200M
ROCKWELL AUTOMATIONNot available

Miniature Contactor, 5 A, IEC, 110V 50Hz/120V 60Hz, 2 N.O./ 2 N.C. Poles, No Auxiliary Contact, Screw Type Terminals, Bulk Pack: Quantity of 20

Miniature Contactor, Screw Type Terminals, 5A, System Control Voltage: 110V 50Hz/120V 60Hz, 2 N.O. / 2 N.C. Main Contacts, 1 Phase, 20
Product Code: 100-K05D200M
Partner cod.: 100-K05D200M
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Tecnichal data
Number of normally open contacts as main contact2
Number of normally closed contacts as main contact2
Vibration resistanceIEC 60068-2
Shock resistanceIEC 60068-2
Altitude, max2000 m (NN) per IEC 60947-4
LifespanMechanical DC control: 15000000 ops
Recommended torque10.6 lb.in
WeightDC: 0.2 kg
Conductor cross sectionMain contact, 2 conductor: 1...2.5 mm^2 + 1...4 mm^2
Protection classIP2X
Voltage type for actuatingAC
Rated control supply voltage at AC 50 Hz110 V
Rated control supply voltage at AC 60 Hz120 V
Rated control supply voltage at DC0 V
Type of electrical connection of main circuitScrew connection
Rated impulse withstand voltage (Uimp)6 kV
Optional overload relaysNone
Main current circuit resistance2.2 mOhm
Rated filament current5 A @ 230/240V, AC-5b
Rated isolation voltage (Ui)IEC: 690V, UL, CSA: 600V
Switching of motor load6 A @ 400V, AC-7b (50 Hz)
PackagingBulk pack (quantity of 20)
Auxiliary contactsIP2X
Rated current (enclosed)9.8 A @ 115V, 1-phase per UL/CSA
Rated power (enclosed)1 Hp @ 230V, 1-phase per UL/CSA
Auxiliary contact configurationNo auxiliary contact
Capacitance, max750 µF @ short-circuit current of 10 kA
General purpose current (enclosed)12 A per UL/CSA
Operating time, closing delay6...12 ms DC (conventional)
Switching of low inductive loads20 A @ 400V, AC-7a per IEC 61095 (50 Hz)
Short time withstand (Icw)60 A for 10 s, 60 °C
Operating time, opening delay8...12 ms with integrated diode
Coil consumption, hold-inCold 3.0 W, warm 2.6 W DC (conventional)
Coil consumption, pick-upCold 3.0 W, warm 2.6 W DC (conventional)
Operating limits, dropout(0.2...0.75) x Us @ 50 Hz, 60 Hz, 50/60 Hz
Switching of lampsGas discharge lamps, open: 18 A @ 40 °C, AC-5a
Insulation class of the coilClass F per IEC 60085, Class 105 insulation system per UL 508
Rating for switching AC motors4-poles: 1/2 Hp @ 115V (AC-2, AC-3), 1-phase (60 Hz)
Switching of hermetically sealed cooling compressor motors11 A @ 400V, AC-8a (manual reset of overload release (50 Hz))
Operating limits, pick-up(0.85...1.1) x Us @ 50 Hz, 60 Hz, 50/60 Hz
UL class K5 and RK5 fuses rating40 A @ 600V, 5 kA available fault current per UL 508 and CSA 22.2 No. 14
DIN fuses (gG, gL) current ratingType 2 (per IEC 60947-4-1): 16 A @ 400 V, 50 kA available fault current
Rated operational current (Ie)4-poles: 5 A @ 40 °C, AC-3
UL class J and CSA HRCI-J fuses rating30 A @ 600V, 50 kA available fault current per UL 508 and CSA 22.2 No. 14
Rated operational power (Pe)8.3 kW @ 240V, AC-1 (50 Hz), ambient temperature 40 °C
Switching of DC loads2-poles in series: 6 A @ 48/60V (Non-inductive or slightly inductive loads or resistance furnaces DC-1 at 60 °C)
Optional accessoriesFront-mount auxiliary contacts, surge suppressors, electronic timers, mechanical interlocks
FeaturesMini-contactors, Uniform panel mounting dimensions, Panel mounting or mounting on 35 mm DIN Rail, Made of environmentally friendly materials
UL class CC and CSA HRCI-MISC fuses rating30 A @ 600V, 50 kA available fault current per UL 508 and CSA 22.2 No. 14
Climatic withstandIEC 60068-2-30
Ambient temperatureStorage: -55...80 (-67...176)